how hard is it to take the front fender off? do i need to take out the headlght or anything like that? are there any tricky bolts? i will only have a few hours of daylight to accomplish this so i didnt want to start it and not be able to finish. thanks

i took off my driver side. under the hood, there are like 5 bolts and by the door hinge, there is one. and at the bottom of the fender by the door there are two, both of which were rusted and broke off inside the car. and on where the fender connects to the bumper there is one in there as well. and a few plastic screws in the wheel well that hold the mud thingy on there. you might have to remove that first before you can get to the bumper one... and there is one on the very end of the fender. you can get to it inside the engine bay by the headlight. its hard to explain, but get a flashlight and look around in there. if you are facing your car, on the driver side, its on the right wall. 10mm bolt i think, a pita to get in and out. the fuse box is in the way. but i think thats all.. hope that helps some.

i got it, thanks