ok, i need to know where you guys got your dual projectors from. i just called nopi and they don't have any in stock but could place an order but still wouldn't know when they can get them in. they have everything else i need. so please peeps, let me know where you got yours from and how much and how long it took to get them. thanks again guys!!!
later

ok, so far all i can get is the chrome housing of the dual projectors. the black ones are on back order and also have been known to flake so they have been recalled. so does anybody know about the ks projector headlights for our cars? do they use the 9006 bulb or a h3 or h4 bulb? i am only going to get the lights if they use 9006. but if it comes down to it, i'll just get the chrome projectors and paint them. i'll just ahve to wait and see.
later

there was a post awhile back where a couple of the guys found another place... that's where sonikbewm ordered his i think... lemme look for the post. taht's where i think i'm ordering from too.

*edit*
here's the place:
http://shop.store.yahoo.com/dpstore/custom-headlights-mitsubishi.html

and the post:
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=7&topic_id=35819&mesg_id=35819&listing_type=search

lemme know how it goes. i wanna order some eventually. HID's and dual projectors sounds nice... }(

-marc

='95 RS 5spd Red=
CAI
A'pexi N1
Hanabi 9000k HID
SPAL Deluxe Power Windows
Nakayama GT5 17's
GSX Calipers
AEM Rotors

255 is fricken short

I have Chrome Projectors - Bought them on Ebay for $170.00 + S/H. Love them - had it for a year now.

The Low Beams are H3 Bulbs (I have PIAA Super Plasma H3 - 85 Watts).

The High Beams are H1 Bulbs ( I have PIAA Super Plasma H1 Bulbs).

Hope that helps,



Later,

yeah, the place where sonikbewm got his from only has the chrome dual projectors b/c the black ones are on back order and all. man, i don't really want chrome projectors unless i'm going to take them apart and paint them black. if i can just find out if the ks projectors use a 9006 bulb or not i'll be set. damn, i got to find this out. tick tock tick tock tick tock.
later

ok, how is the brightness? when you upgraded the bulbs, was it like stock lighting or better or worse? also, did you have to do any cutting or splicing into the stock wires or what? thanks.
later

The cool thing is it's a direct plug in. No splicing needed. With the PIAA SUPER PLASMA Bulbs - it is a lot brighter then the stock 9006. Not sure if you use the cheap Hyper-White bulbs.

I like PIAA Super Plasma cuz their at 5000K.

I took the old lights out without removing the bumper - there's a right up somewhere here.

Later,

Sorry about taking so long to see this post. If all you can get is the chrome ones, get them and paint them black.

right now i'm running the cuzo's bulbs. i don't remember the wattage but they are damn nice. $50 for a pair. but they are worth it. so with the h3 projectors, they are already wired up, you just plug it into the stock harness by the fender correct? that sounds how it should be. well i'm pretty sure i'm going to get those projectors. they are single projector with gold ion lens. so i'm going to get the piaa extreme white H3 bulbs(close HID) yeah right, 55 watts = 110 watts. so in about a week or week and a half, all should be done.
later