I'm trying to make the angel eyes I want to know is how do u test out the bulb to make it light on. Dont want to put everything together and and the bulb dont work.

im not sure about typical filiment style bulbs, youll have to check the manufacturers specifications. if you are using LEDs, though, typically the longer wire comming off the "bulb" is the positive, and you can hook it up (with an inline resistor) to the positive battery termianl, and connect the shorter leg to the negative battery terminal. you could also use any 12ish volt system, wether its batteries, a tap frome wires inside the car, or a 12volt adapter for a home appliance.

http://www.eatel.net/~amptech/elecdisc/caraudio.htm

go about 1/3 of the way down on the right fram to the section entitled "light emitting diodes". i just have to mention also how awesome of a site that is.

Go to this website, and follow these directions exactly. You can use a 9 volt battery to test them.

http://students.washington.edu/ashis/Creating%20Custom%20Angel%20Eyes.htm




Black '98 GS auto
I-vers intake
Custom (home made!) ram air conversion
Front & rear strut bars
OBX fog lights w/ fog light mod
Illuminated tail mod
RSR rear section
JVC cd player
Kenwood

I am using the LED bulbs with the resistors but it dont want to light up.

I just got my LED's hooked up to resistors too, and I was able to get them to light up with a 9 volt. Just make sure the resistor is on the positive wire on the LED (the longer wire). Also make sure you have the right LED's, cuz if you bought the infrared ones from radio shack, I think those are for the TV remote, and you can't even see the light from those. Check that website I told you about to know which LED's to get.



Black '98 GS auto
I-vers intake
Custom (home made!) ram air conversion
Front & rear strut bars
OBX fog lights w/ fog light mod
Illuminated tail mod
RSR rear section
JVC cd player
Kenwood

you'll love the finishied product!!!





later

I have got 4 Blue LED's taped and ready to go for this mod. I was going to do it, but decided not to. These LED's cost 4$ a piece, ($16 value) and Ill sell them all to someone for $10. They are ready for angel eyes, all you have to do is make the ring. Let me know via e-mail if interested.