i want to buy some gauges but havent seen any pics of them at night. If anyone has the AutoTecnic reverse gauges PLEASE post some pics of them. I like those gauges but wanted to see them installed and at night. Any pics of gauges at night would be good though....im still trying to find one that i like...Please tell me the price and where u got them at, that would help alot...

dfresh

I have them. Just the reverse indiglos tho. Not the new 3D's or whatever. They are badass at night. I don't have any night pics b/c the flash always interferes. I'll post a pic of them in the car. Trust me tho, with the brightness/color controls, you'll love them. They look really good at night. Anyone that has seen them really likes them. Anyways, here's a pic of them in the car. Not exactly what you asked for, but some motivation and/or proof that I know about them from experience. I am very pleased with them.

Here's a pic of mine. Not that great, but you get the idea.

where did u guys get your guages and what they cost ya?

damn I wish they made those blue center ones for a 9K tach. Anyone know if those are available? I only see those come with a max of 8K rpms...

here is mine.. they change colors and shit.. pretty cool :)
also 9k redline...

I paid 35 bucks on ebay for my reverse indiglos. I am installing tomorrow when i get home from school.

96 gs-t
Boost,and air fuel gauge
Borla Exhaust and muffler
shitty 16" rims

not installed:
97-99 conversion
Sensie front
invader skirts
invader rear
double deck aluiminum wing
m-3 mirrors w/ led
Front strut bar
coilovers
reverse indiglo gauges
Kenwood excelon in dash tv/dvd
10 disc changer

wanted:
6 bolt motor
18" rims


Remdawgz@aol.com

I got them off ebay. I think procarparts.com has them. maybe nopionline. I think ebay is good for them, and the ones we have are AT. They make NT and Turbo and AT and MT w/ 9k tach. Not sure what the going rate is, but I paid like 85 shipped way back when they 1st popped up. They're probably like 40 now. :P

if our cars only go to 6800rpms anyways what would be the point of a 9k rpm tach other then oh it goes to 9k rpms? the car wont rev that high unless u get a new ecu from howell or ems, and then because the stock tach wasn't calibrated to go to 9krpms would it be even acurate????

are they adding another 1000 rpms to the end of the 8 or are they squishing 9k rpms into a post for 8krpms???

Sweet......but one question, after they are installed do the needles still light up because in the pics that where posted the needles are not lighted....

dfresh

yes the needles still light up, you can dim the needles using the dimmer you used to dim the display. if they're too bright they reflect white on the gauge, so i have them about half-way dim. in the pics they probably have them fully dimmed

Evan B
97 GS
Stamford CT
EvMan2345@aol.com

(Its actually stock sarrono red, but my digicam sucks, so it looks like a different color)

Check these out.........is it true that they just slip over the stock gauges, or are they replacments......Hey 9d9 i take it that these are the same ones u got right? Im a little worried about the price being so low.....I have never bought anything off of Ebay before..

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6773&item=1876165582

dfresh

I didn't take my needles off. I slipped the gauges over the needles. Mine are accurate according to the radar signs. Those look like knock-offs. Probably the same, just no name brand on them. The AC Autotechnics ones are really good. I did lift them up to put clear epoxy on the back of them (brushed it on after slipping them on) to make sure they don't pop up and cause the needles to hang. You can use 2 sides tape, but I thought epoxy would keep it down a lot better. Try and get the AC's if you can. They will probably stand by their product if anything went wrong. Then again, for $25, you might get a deal. Your decision. They slip on tho.

i like those. pretty clean almost look like the stock numbers. i dont think a lot of people have them

^^Those gauges are pretty cool, all blue and a very deep blue color. But those are for the 4g63 dash. Do they make them for the 420a??

Here's a picture of mine. The faces are silver in the daytime to match my Autometer Ultra-Lite guages in the pillar, and I put the blue LED lights in the Autometer's so they also light up blue at night. It looks pretty sweet!