Professional wash, high speed buff, and wax - $94

Tip for the washer - $20

Having a super sexy black car that is now totally spotless - Priceless.

looking good :thumbsup

New digital camera - $189 ;)

>New digital camera - $189 ;)


lol u beat me to it

U have a nice car Dino! I have never really seen a good picture of it (although I will have to agree with the camera comments above ;) )

Nice. I want my car black :(

>Nice. I want my car black :(

no you don't it such a pain in the ass to keep clean. i used to constantly wash and wax mine, i had to do it about every 3-4 days to keep it looking nice. finally i got tired of it and now it looks dirty as hell most of the time.

Yeah, mine too.. i got so tired of seeing it look grey i went and paid $100 for a professional wash, buff, and wax job. Best thing is, it has a 7 day rain guarantee - if it rains, they'll wash it again for free.

Yes, my front tires really are that wide.

Yeap, that's my RRE lower tie bar hanging down.

Those are 3rd gen RX7 rims.

yes, it was worth every penny :-)

>Best thing is, it has a 7 day rain guarantee - if it
>rains, they'll wash it again for free.
>

NICE, i might pay to have mine done if i could find anyplace with a rain guarantee. 3 out of 4 times i wash my car it rains with in 24 hours. a couple times, it was clear out when i started washing my car, but a big cloud would blow over from the east mountain and get my car right when i was finishing. or it would rain for like 5 minutes, just long enough to get my car wet.

yup, I had a date on thanksgiving night so I washed my car the day before. ended up raining on our date (everything else was good though ;)

you like mud flaps? it'd look a lot better with those off :) but looks good none the less.

ten bucks says a bird shits on it over night

>you like mud flaps? it'd look a lot better with those off :)


Those are stock ;-)

Sweet car dino... that thing scares me. The only thing that would tip someone off to all the work that's gone into it is the wheels and fmic. It also looks oddly like Juan's car hehe.

Did you put any spacers or machine out your wheels? Or does their stock offset and bore work?

There is a 1/4" spacer between the wheel and the hub on all four corners. 1/8" will work, but not if you want the center caps to fit. it's totally unnoticable except on the front, where it lines up the wheel edge and the fender almost perfectly. it gives it an agressive, wide stance that looks really nice if you ask me.

Lookin good Dino. It does remind me of Juan's car :)

All the admin's must have similar taste. In fact, isn't Jason's car black too?

Is there a rule that says you can't lower a black eclipse?

J/K! Looks good man, but I would also kill the mud flaps!

>Is there a rule that says you can't lower a black eclipse?

mine is lowered

>J/K! Looks good man, but I would also kill the mud flaps!

don't do it, there's nothing worse than a big wad of mud all up on your muff.

>Lookin good Dino. It does remind me of Juan's car :)
>
>All the admin's must have similar taste. In fact, isn't
>Jason's car black too?

Yep, it looks great Dino!

Absolutely Marcus, they told me it's an unwavering prerequisite! ;-)

I'm special they made an exception for me... but grey is just a lighter black...

Looking good Dino, mnine is so horrendous now. Neon wasn't together and I drove in the snow and she is covered in salt and dirt and it's just wrong...

Una salus victus.
"Be like the cliff against which the waves continually break, it stands firm and tames the fury of the water around it" - Marcus Aurelius

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines, AFX 55mm TB (re-installed once exhaust is done, intake was outflowing exhaust)

To be fixed?: Head gasket... unless coolant reservoir is suppose to bubble, hmmmm.

whats with the moulding on the doors? that is only the 2nd eclipse ive seen with that, the other being theallpowerfulme. i guess its a black eclipse thing. arent they usually on talons?

Where has he disappeared to?

Nice and clean Dino. About time :P

hell froze over...Dino washed his friggin car, good job mang

>Where has he disappeared to?


He's around. He lurks, mostly ;-)