job (snail gs) and i worked on this on sunday. i think you guys know!



i will post night time pics when i take them tonight.
later

shit dude thats clean !

when it gets dark tonight, i'll take some more pics. right now, the led's don't show up b/c it's so bright out. i pulled the car into the garage, with the garage door open, and turned on the parking light, and the ring lit up blue with led's. so it's turned out good and only cost $15.
later

for $15 you have got to tell us how you did it , comon man i know you dyin to tell

What kinda headlights are those??

they are stock headlights painted silver

Good job dood. :thumbsup I noticed you made the intervals between each line pretty big. Did you just like that better? Can't wait to see this.


You gotta put up a writeup on how you opened the headlight and put it in there.

Ok well....

Are you headlights 97+ Because my 95's dont have an inside housing like that.

Also, I dont see what it does. Wheres the LED? I know Im confused, so..... Its the headlight bulb that lights it up? Or is there an led? Sorry for the confusion......

that looks damn good! im glad one person actually did this mod...now get us some pics at night! ;)


for all those w/ questions about this mod, go back a page or two in this forum and look for somthing like "DIY angel eyes" as the topic.

the pictures where taken during the day so you really cant see the LEDs light up like shuwa said...more pics will be posted at night. I myself would of added more groves but it looks awesome at night!

>Ok well....
>
>Are you headlights 97+ Because my 95's dont have an inside
>housing like that.
>
>Also, I dont see what it does. Wheres the LED? I know Im
>confused, so..... Its the headlight bulb that lights it up?
>Or is there an led? Sorry for the confusion......



its the stock 97-99 painted silver or white. the led is the circle where the high beams are

98 headlights painted silver. i used blue led's to light up the halo ring. the high beam light was just on as a deminstration. when i take the pics, i'll have them posted.
later

well, i got two pics so here they are. i'm not the best at taking photos so oh well.


well that's them, let me know how they are.
later

one more thing, like i said, i'm not the best at taking photo's so i'll get chris(ls1z28chris) to take some better ones.
later

KaptainMyke: cool.
KaptainMyke: thats fkn phat
KaptainMyke: should have done white tho
KaptainMyke: the blue is too contrasting to your white lites
KaptainMyke: imo

EclipseGTR29: yeah, i honestly didn't know what to go with. if i want to go back and do it with white led's, give me 2 hours, and they will be white
KaptainMyke: haha
EclipseGTR29: making the halo was a bitch though, and cutting all the little lines sucked ass

Those look pretty damn cool.

Dude, you can't tease us like that! How'd you do it... details, I haveto open up my headlights soon and I'd like to do that while I have em out :)

Those look sweet. White might be better, but they still look great.

There was a thread about this a few days ago...

http://forums.2gnt.com/cgi-bin/dcforum/dcboard.cgi?az=read_count&om=4982&forum=DCForumID15&viewmode=threaded

EDFDC OWNZ

Will Werk for Mods

1995 RS

Current Mods:
Cracked Front Bumper
K&N Intake
Flowmaster Muffler
Platinum +4 Plugs
MSD SuperConductor Wires
and one heavy Right Foot!!!!

**Badgers??? We don't need no stinkin' badgers!!!**

**No Shirt, No Shoes, No Dice!**

Can you pleez take pics of it at night, with just your low-beam headlights on?

I'm sure someone can photoshop the white LED color in there for ya to see how it would look.

Also if you can find a bucket or 2x4 or something to sit your camera on while you take the pix, it won't come out all blurry.

here's a quickie of what needs to be done:
for bumper removal to access headlight, go here... http://forums.2gnt.com/dcforum/DCForumID15/5036.html
for making the rings and ect...go here...
http://students.washington.edu/ashis/Creating%20Custom%20Angel%20Eyes.htm
as for taking apart the headlights, do this...
1. take off headlight and remove all bulbs,
2. place in over on cookie sheet for 5 minutes at 350 degrees,
3. wear gloves to remove headlights and open headlights,(i used a flat head screw driver to pry them open)
while your headlights are apart, i suggest removing the orange reflector, it's looks better without it. and if you wanted too, paint the housing as well.

if there is anything you guys want to know or need to know let me know. damn too me know's. anyways, contact me as the following:

AIM: eclipsegtr29
EMAIL: shuwa29@bellsouth.net
PHONE: 770-265-2349

anytime you need to know something, let me know and i'll help you guys out.

later

good job! I will try to do it in the holiday! u deserve a star..

Ken

5zigen rearsection/Cherrybomb glasspack resonator/Bosal header/injen short ram intake/ported TB/AFX UDP/Fidanza cam gears/Power Stop cross drill rotors(front)/shunk2 coilover/Koni adjustable (front)/KYB struts(rear)Konig V-racing front bar/rear upper bar/painted black Enkei RSF2 17" with Kumho/ Nakayama projectors headlight/K2 8000K HID kit /WW 3 pieces wing/interior mods

sweet!!! i gotta star!!! anybody else?
later

here's a better night pic:


and one with the lights on:


for some reason now, my right angel eye is not as bright. i'm thinking the resistor came lose or something, but it is only half as bright. i'll find out why tomorrow.
later

after opening the lights, do u get water or fog in them? What did u use to seal them and how much?

Seal them with silicone.

For NE1 it may help,

When I opened my headlights to paint them black, I didnt trust the oven thing. I was afraid Id melt it all. I used a hair dryer and heated it inch by inch and pryed it open inch by inch.

Also, to seal it I simply heated the old silicone that was already on there and mushed the lens back on the housing. Worked fine.

that's exactly what i did my first time. inch by inch with a hair dryer. but i assure you, 350 degrees for like 5 minutes will do no harm. anything else, let us know.
later

I love the LED's but you know as soon as you hit the street cops will drop their beloved doughnuts to throw work orders and tickets at you... I might try that with a light light blue whiteish LED see if I can't get the SUPER BRIGHT HID look and a cool Halo effect...Ill be posting picks in about 2 weeks when I am finished (gotta order some LED's in special color)

with the headlights on, you can not see them. i have cuzo bulbs in my headlights and they blind the piss out of people. so there's no way with my headlight bulbs you will be able to see the blue unless you are within 5 feet. if i have the headlights off, then it's just a matter of time.
later

Sweet mod!!! You just earned sumor stars playa! -Soular

i wish i could do more stuff like this more often. i went from 2 stars to 8!
later

Nice man...What did you do to hold the ring in place inside the headlight? and what is the right size so I dont make the ring too big? Thanks in advance!


MiztahfooLish...'95 RS

-front & rear strut tower bars-17"x7.5" Rota Subzero Gun Metallic Wheels-245/45/17 Kumho Ecsta 711 Tires-MatrixGR Motorsports Short Ram Intake-OBX-R Dual DTM Exhaust-Blitz front & rear end-97-99 body conversion-97-99 headlights-Gen II Altezza taillights w/ center piece factory paint matched-OBX-R pedals-Diamond Thread aluminum floor mats-white shift & e-brake boots-anodized blue fire extinguisher-Autometer tach w/ shift light-Ractive carbon fiber look shoulder pads-Pioneer P4400 XM Ready CD Headunit-Pioneer 2way 5.25 front door speakers-Pioneer 2way 6.5 rear speakers-MA Audio Synergy Series 1500W Subwoofer-600W 2 channel American Pro Audio Amp-Tsunami/Scosche Audio Wires/Distribution Blocks/Fuses

i used a can of cream milk to make them the size i needed. just a little bigger than a can coke. as for them staying in place in the headlights, then the clear housing is put back on, they just kinda chill there without moving. anything else, let me know.
later

this is cool as shit... very nice work. it doesnt look like it would fit very good in 95-96 headlights.
jeff