hi guys, i want to know the proper procedure on the front and rear bumper removal. please have as much details as possible thanks!
pictures will help also!

look in things we seen b4, or search for "cyan" he had a writeup on it....

even check the main page for it....

i couldn't find the thread by cyan nor could i find the thread in things we've seen before. however, i did find some information on how to take out the front/rear bumper but it was pretty vague. can you post up the link for the thread that you were reffering to? thanks

hahah i will help ya out i ya you use the feedback button ;)
the first screws will need to be taken out of the headlights, they are located around the top turn signal and bottom of the turn signals in the engine bay. after removing those headlight screws go under neath the bumper and you will notice another headlight mount/ support bolted to the radiator support(behind/above the stock foglights or covers. if you want it is easier to pop the plastic screws out from the underside of the bumper than to unscrew the hard to reach headlight screw. there are also screws connectin the fender to the bumper to prevent sagging. and plastic screws by the front liscense plate that are easily loosened. You will probably have to take out your foglights either way.

If any one else has any imput feel free too copy paste and add more :)

thanks a million.. some points for you :P

if you need any more help feel free to contact me :)

i dunno about ^^^, but i didnt have to mess w/my lights at all when i take/took off my front bumper...

2 screws in each fenderwell, up top (lay on your back, i thinkk its 10mm, maybe 12...)

4 big bolts on the chasis... kinda in the middle under the car, they are supporting braces type things that are affixed to the bumper...

and all the 10mm bolts that are right by your stock hood latch...

the rear, i dunno sheet about....

dude there are 2 plastic screws under each headlight, they connect the part underneath the headlights to the bumper support, you can pop them out from the under-side and not have to remove the headlights.

you cant get the bumper off like that unless you dont have a bumper support

heh, if u say so...... i didnt touch mines..

invest in a chilton's, and download the FSM's from "darkone"..

good luck