i got an aftermarket sunroof in my car. either it's aftermarket or it's oem installed after my roof got screwed up. anyway how can i get the slide that goes in it to block the sunroof if i want to? It doesnt have any type of cover now.
thanks
jeff

are you asking how to mount it or how to get one?

if your asking how to mount one, they are a BITCH to put in. You have to remove the glass (remove the 6 torx screws up inside the car) and put it in the tracks to correctly do it. Then put the glass back in. I had to do that when I did my headliner and slider.

yeah i guess that's what i'm asking. How much the slider costs..
thanks
jeff

Yeah, the slider was a b*tch to do..

I was trying to put the slider thing in, without taking off the glass.. don't ask why :-) ..

There are those two clips things, where you push it towards the center of the car, and you could easily put them into the tracks..

~Tacoman

well if you have an aftermarket sunroof you're going to have to measure it and then have one of us measure ours to see if it will work. Otherwise you will need to go back to the place that put the sunroof in (if you know who) or find out the company that made that sunroof. You might have to do a custom job here with this one.