Anybody have any ideas of how to remove the spare tire support. Thanx

i saw a guy who was installin a custom sub box and removed it, i belive you have to cut it off, then grind down the edges. this is what he did, and im guessing if you could just un bolt then he would have dont that, so im betting cut and grid is the only way.

Only way I could think you could do it would be to cut it out. You could check for a write up but I don't know if there is one here. Good luck.

The only way is to cut and grind it, if you try to pry it out you have a chance of ripping a hole in your trunk.

i used a sawz-all. be careful

I wrote this up:

http://stereoinstall.importvenom.com

I used a plasma cutter, but not every one has access to one of those. You can use a cutting wheel and then just grind it down. Don't forget to paint the exposed metal or it will rust.

i used a saws-all too. it was a PITA and took about an hour. really loud. wear some ear protection and make sure you have saftey glassess unless you want chunks of hot metal in your eyes. it's not fun, but it's worth it. the reason i put a sub down there was so it would be harder to steal and more difficult to see. anyways, i'm done now.