hey guys. i just put in one've those SPAL deluxe power window kits. or almost finished putting it in. just gotta finish up the wiring an mount the switch. the motors themselves are all in an the doors are back on. install wasn't too bad. just took awhile to find a good way to mount it. after that it made the 2nd door really easy. oh runnig wires is a bitch. the stock one for the speaker is like completely in the way. especially on the part after the rubber sleeve going into the body of the car. there's like a frickin wire harnes in there that you hafta take out from the inside under the dash and go around. took me awhile to figure out how to take out the glove box too...

wiring's really straight foward. or should be but i'm doin something else. i'm mounting my switch in the center console where the ashtray is. i'm tryna make it so the lid still works too so that it snaps closed over the switch. almost got it to work. LOTS of hacking involved though. should look really nice when it's done though. i just like the idea of having the switches hidden under there and sliding open the lid to reveal them... hehe. gonna replace the light in there with a blue LED too so the switches are backlit at nite. (they window icon on them glows green too). should be cool.

oh yea does anyone else's window make a loud popping noise when you first start rolling it down (from being ALL the way up). i was just wondering if the windows are made to sort of lock when they're all the way up. that's what it sounds like anyways. its not hard to move them it just feels/sounds like it's coming out of bein locked all the way up or somehin. they did this from before i put the kit in too so just wondering.

'95 RS 5spd Red
Black Chrome Matrix Type X CAI
A'pexi N1 Catback Turbo Exhaust
Viper 500esp
Indiglo Gauges
Clear Bumper Lenses
Hiper White Bulbs
Interior Blue LED/Neon Lighting w/ Music Interface
SPAL Deluxe Power Window Kit

Still hafta install: Power Trunk Kit

congrads! Well mine make a pop sound when i first roll them down so its no biggy

Mine make the same sound, its normal.

k cool thanks guys. outta curiosity is there anyways to make the pop noise go away? it's not that bad, but i could live without it...

'95 RS 5spd Red
Black Chrome Matrix Type X CAI
A'pexi N1 Catback Turbo Exhaust
Viper 500esp
Indiglo Gauges
Clear Bumper Lenses
Hiper White Bulbs
Interior Blue LED/Neon Lighting w/ Music Interface
SPAL Deluxe Power Window Kit

Still hafta install: Power Trunk Kit

don't roll the windows down?? I think its just the mechanism when it starts to move.

it may be the rubber making the noise when the window looses contact with it

sweet, thought about doing this one, how much did it run you???

>don't roll the windows down?? I think its just the mechanism
>when it starts to move.

lol thanks.. :P

umm the kit from slickcar.com was like $140 i think. switches was another $40. you could probably get your own switches though. it's just a matter of knowing how to wire them. you'll prolly hafta use a couple relays. the motor itself only has 2 wires. hook that up to a 12v source and it turns. reverse the polarity it turns the other way. should be simple enough to wire.

'95 RS 5spd Red
Black Chrome Matrix Type X CAI
A'pexi N1 Catback Turbo Exhaust
Viper 500esp
Indiglo Gauges
Clear Bumper Lenses
Hiper White Bulbs
Interior Blue LED/Neon Lighting w/ Music Interface
SPAL Deluxe Power Window Kit

Still hafta install: Power Trunk Kit

sounds cool, you still interested in that mirror? we kinda lost contact its stil chillen here if you want it. let me know

I have that same kit, and it does not make any noise at all...but my buddy with a camaro got that kit too, and his does make that noise?? Wierd.
Congrats on the install...Did you do the power locks while you were in there? I love my keyless entry more than my power windows :)

Another thing I've been interested in doing to my ride. I hate having to reach over to roll down the window, and no power locks sucks as well :( If anyone has pics and a writeup for this to show mounting points etc...that would be sweet and probably benefit a lot of us here :) Congrats on the uprgrade.


96 Talon ESi Mods
apex' dunk exhaust
injen short ram intake
magnecore 8.5mm wires
blocked off EGR
front/rear strut tower bars
custom painted interior
carbon fiber hood

i had my power locks put in by the alarm guys. i prolly coulda done it myself but i wasn't planning on putting switches for the locks so it was easier to just have them hook it straight to the alarm. i think it's pretty neat having power locks and power windows and no switches on the doors :P

ya i think a writeup would be a pretty good idea.. i don't got a camera though. it'd be much easier to show mounting points with pics...

'95 RS 5spd Red
Black Chrome Matrix Type X CAI
A'pexi N1 Catback Turbo Exhaust
Viper 500esp
Indiglo Gauges
Clear Bumper Lenses
Hiper White Bulbs
Interior Blue LED/Neon Lighting w/ Music Interface
SPAL Deluxe Power Window Kit

Still hafta install: Power Trunk Kit