Go back to previous topic
Forum nameInterior/Exterior
Topic subjectpainting stock 95-96 skirts
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=33100
33100, painting stock 95-96 skirts
Posted by EclipzeGamer, Oct-23-02 01:09 PM
What do I need to do to paint them and make it stick to the urethane?





Jaeson
'96 Eclipse RS

16.537 @ 84.00 mph, 2.489 60'

Looks:
APC Euro clear bumper lens
front grill
chrome front emblem
Razo carbon fiber pedals
carbon fiber gauge bezel

Performance:
Perma-Cool oil cooler
custom airbox
GS-T muffler

On The Way:
Kaminari GTR wing off Shauns NER Eclipse
Hurricane_GS front & rear lower tie bars
95-96 side skirts
33101, RE: painting stock 95-96 skirts
Posted by 97xtc, Oct-23-02 02:03 PM
Personally, I would take them to a boby shop and let them do it, to ensure they look good when finished. Or if you want to do it yourself, get some 400 grit sandpaper and get all the gloss off(if the're used) then hit them with a good quality primer. Then get some 1000 grit sandpaper and wet sand the primer until its very smooth and you see no small scratches. Then wipe them down with some type of paint prep cleaner and paint-em.
33102, RE: painting stock 95-96 skirts
Posted by EclipzeGamer, Oct-23-02 07:18 PM
I know all that, what I need to know is what additive I need to make the paint stick to the urethane, so that what happened to Kaptain Mykes front don't happen to my sides.





Jaeson
'96 Eclipse RS

16.537 @ 84.00 mph, 2.489 60'

Looks:
APC Euro clear bumper lens
front grill
chrome front emblem
Razo carbon fiber pedals
carbon fiber gauge bezel

Performance:
Perma-Cool oil cooler
custom airbox
GS-T muffler

On The Way:
Kaminari GTR wing off Shauns NER Eclipse
Hurricane_GS front & rear lower tie bars
95-96 side skirts