Hey guys, I need a little help. I got those projectors from procarparts awhile back and the other day my passengerside assembly quit working. The parking light works, but the high and low beams dont work. I took out the low beam and the filiment has a small gap, its blown cause the color of the glass is kinda blueish like they get when they're blown.

Would that cause my high beam not to work either? Are they ran together so if one doesnt work, its opened the circuit and the other one wont have power either? Cause I checked at the stock plug that connects to the headlamp, and it has 12v

tia

hey brad if it's run in series then it won't work. Easy way is too check too see if you have power going to to the high beam. use a test light if you have one. If you don't have power going to the high beam but you do too your low beam supply then more than likely it's run in-series....

Replaced the bulb, now both work, so anyone that wonders why both their bulbs went out at once....

Brad, what did you do with your stock headlights?

'98 Talon Esi

Mods:
System:Alpine CD Deck w/ 6d Changer|2 10" C2 Precision Power Subs|Fosgate 360a2 Amp
Engine:helmut.idlegames.com/sounds/tal_cdb.mp3|Bosch Platinum +4 Plugs|Iceman CAI
Suspension:Upper Front & Rear Strut Bars|Bridgestone Potenza RE910 Tires
Exterior:15% Tint All Around

Next Purchases:
Symborski Shifter Kit
Short Shifter

"Power is the ultimate aphrodisiac!!"

Thats weird, both of my low beam bulbs blew in my projectors a few days ago and I was driving around using my brights to see. So the high beams will still work when the low beams are out. Mine are from procarparts.com as well.