Go back to previous topic
Forum nameInterior/Exterior
Topic subjectRyan_RS, Question
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=31559
31559, Ryan_RS, Question
Posted by scirio, Sep-22-02 05:38 PM
Dude. Okay I got the LED lights. I put em in and WTF is there a certain way to put em in or did I get screwed again buy a seller. One light doesnt turn on, period. other only half of the LEDs light up REALLY dimly. I didnt pay 40 bucks for some BROKE ass lights man.. Let me know. Oh and some only turn on that big center LED, again, WTF!?!!?
31560, RE: Ryan_RS, Question
Posted by Ryan_Hes, Sep-24-02 07:27 AM
did I get screwed again
>buy a seller.

No I'd never do that

One light doesnt turn on, period. other only
>half of the LEDs light up REALLY dimly. I didnt pay 40
>bucks for some BROKE ass lights man.. Let me know. Oh and
>some only turn on that big center LED, again, WTF!?!!?

Hmmm, that's really odd. They all lit up just fine for me.. One thing I had to do for the very outer ones was to put a small piece of tape between the bulb and the harness it plugs into, so it's snug because I noticed they fit loosely in those ones. Besides that, I'm unsure...Fiddle around with them, they should work fine.

Let me know how it goes.



31561, RE: Ryan_RS, Question
Posted by scirio, Sep-24-02 10:48 AM
trust me man it not just ONE aits 5 of them. One turns on nicely. so WTF. Thats not my fault. Want your lights back?
31562, RE: Ryan_RS, Question
Posted by Ryan_Hes, Sep-24-02 12:41 PM
Still sounds fishy...I wonder if theres a difference for 95's? or something, I dunno.

Go ahead and send them back, and I will refund you completely.

p.s. In the future you should handle this kinda thing through e-mail, not on a public message board...I dont want people to think I'm a bad seller... ya know?
31563, RE: Ryan_RS, Question
Posted by My9t5Talon, Sep-24-02 01:19 PM
are they apc or eurolite lites?...I'm looking to get some and hope that's not the only company out there that has them...
31564, RE: Ryan_RS, Question
Posted by 9D9 MITSU RS, Sep-24-02 01:39 PM
one of my lights wasn't working. I looked and found that the metal part that makes the connection had been bent down. Also, they can only go in 1 way and click into place.
31565, RE: Ryan_RS, Question
Posted by Ryan_Hes, Sep-24-02 01:46 PM
Those prongs at the bottom of the harness can sometimes be too low. Use a butter knife and angle them all up a little more and then try again. Make sure all the connections are made.