It's Reaaaaaaaaaaaaaal easy..it takes 5 minutes to pry the lights open, remove the amber and seal em up. Some tips are to put the clips back on when you are resealing em - pry em open starting from the corner lights. I stuck em in for 225 degress for 15 min and reseal for 5 min. Too easy..
96 RST


http://www.kaptainmyke.com/tir/gallery/SemperBoost
Star Stage I turbo kit /Starion I/C w/ 2" chrome piping / GReddy Type-S BOV / Missing Link / Custom APEXi- GReddy 2.5" exhaust / Nology wires / Dual Gaugepod pillar mount / APEXi EL mech boost gauge / Autometer A/F gauge / Southland Dual Friction clutch / B&M short shifter / Energy Suspension shifter bushings / 16" GSX Rims / Front/ Rear camberkits / Eibach Prokits / Tokico Blues/ Front Upper, Rear Upper/Lower strut bars / Rear GST sway bar
X-drilled rotors / Axxis pads / Stock GS/GST sideskirts /Color-matched center taillight/ door handles/ sideviews
Cleared Headlight turns/PIAA bulbs

95-96 lights will this work as well with 97-99

I was tryin to see from the outside, but i can't see any screws or anything to just take the amber out of my '95 headlights...?

the screws are inside the headlight. you need to cook your headlights in the oven :) then open the headlights and you can see the two screws holding the amber piece.

doods, I have tried to get my headlight off be 4 and couldn't how'd u do dat?




stock 95rs=backroad rally champion

i know they're on the inside... but in other peoples pics of the 97+ style u could see the screws from the outside...... obviously have to take them apart to get to them..... i can't even see any screws through mine though....