| Go back to previous topic |
| Forum name | Interior/Exterior |
| Topic subject | need a measurement please |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=2908 |
2908, need a measurement please
Posted by mike_d, Apr-10-01 04:47 PM
could someone take a measurment of their stock 97-99 headlights. i need the length from the bottom of the light corner to corner. thanks
|
2909, RE: need a measurement please
Posted by cyan, Apr-11-01 03:03 AM
i took two measurements for you, use whichever one you were wanting.
1-measurement from corner to corner with a tape measure curving with the light.
2-measure in a straight line from one corner to the other.
1=23.5"
2=18"
the first one is much more accurate of a measurement, i had to estimate where the measurement was on the other one cause the light is curved of course
http://www.geocities.com/blue2gnt
|
2910, RE: need a measurement please
Posted by mike_d, Apr-11-01 04:26 AM
thanks dude. i need these cause im going to try to mold the 97 eclipse headlights to a 97 talon front bumper
|