Go back to previous topic
Forum nameInterior/Exterior
Topic subject'95-96 with grill???
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=28396
28396, '95-96 with grill???
Posted by phatGS, Aug-07-02 04:48 PM
I know someone on here has a 95 or 96 stock front with grills on it, wondering what it looks like. Any chance of gettin a pic?? Thanks.
28397, RE: '95-96 with grill???
Posted by Weezle745, Aug-07-02 05:44 PM
eclipzegamerz



28398, RE: '95-96 with grill???
Posted by EclipzeGamer, Aug-07-02 08:39 PM
Here's my pics of it again. . .









Jaeson
'96 Eclipse RS

Looks:
APC Euro clear bumper lens
front grill
chrome front emblem
Razo C/F pedals

Performance:
Perma-Cool oil cooler
custom airbox

On The Way:
Kaminari GTR wing off Shauns NER Eclipse
Hurricane_GS front & rear lower tie bars
95-96 side skirts

28399, RE: '95-96 with grill???
Posted by Chowmane99, Aug-08-02 01:02 AM
Here's a 98 Eclipse Spyder Front Bumper with Grill for comparison:











Later,
28400, RE: '95-96 with grill???
Posted by phatGS, Aug-08-02 07:37 AM
thanks...... eclipzegamer.....where'd u get your grill at or did u just make it yourself?
28401, RE: '95-96 with grill???
Posted by ghost, Aug-08-02 07:54 AM
>thanks...... eclipzegamer.....where'd u get your grill at or
>did u just make it yourself?

Not to speak for him, but just answering your question promptly..... Pretty sure he made it himself dude...looks like the home depot gutter guard special we all use...
28402, RE: '95-96 with grill???
Posted by Blk95Talon, Aug-08-02 02:55 PM
heres mine, did it myself
28403, RE: '95-96 with grill???
Posted by EclipzeGamer, Aug-08-02 05:39 PM
He's right, Home Depot and gutter guard. Works wonders. Get two pieces, it takes most of one for the center, and cut up the second for the sides.

When you put it in, undo the plastic screws on the black plastic air dam behind the bumper (there's 5 of 'em), pop the plastic thing down from behind the bumper, then slide it up in there and zip tie it to the fog light mounts (it works even if you have fogs). Snap the plastic piece back up behind the bumper against the mesh to hold the bottom in place. For the sides, just cut the pieces big, bend them around the inside lip of the hole, and bondo or rubber cement it in. It's tricky, but mines been holding for about 4 months now and its not coming loose. Hope that helps ya out :)



Jaeson
'96 Eclipse RS

Looks:
APC Euro clear bumper lens
front grill
chrome front emblem
Razo C/F pedals

Performance:
Perma-Cool oil cooler
custom airbox

On The Way:
Kaminari GTR wing off Shauns NER Eclipse
Hurricane_GS front & rear lower tie bars
95-96 side skirts