Go back to previous topic
Forum nameInterior/Exterior
Topic subjectFinished product pictures
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=27725
27725, Finished product pictures
Posted by Ryan_Hes, Jul-30-02 09:39 AM
Well, here's the finished product after clearing out my corners and painting my headlight housings to match the car. Let me know what ya think. It's also lowered now too. :-)








27726, RE: Finished product pictures
Posted by iamnotwhoiam, Jul-30-02 09:55 AM
wow.. impressive..
27727, RE: Finished product pictures
Posted by ghost, Jul-30-02 10:10 AM
I think it looks very tight man! Very clean and flowing....wow...just awesome for stock! Great job man!

How much did you lower it and what did you use?
27728, RE: Finished product pictures
Posted by xEclipsE RaceRx, Jul-30-02 10:23 AM
Wow :thumbsup I love yur sig picture too


1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition
Check Out My Site For Pix
http://mywebpages.comcast.net/EclipseRaceR/Drop/
27729, RE: Finished product pictures
Posted by jsupetran, Jul-30-02 10:37 AM
damn that's nice! i always thought everytime i saw your car before, it needed to be dropped. looks great.
27730, RE: Finished product pictures
Posted by Ryan_Hes, Jul-30-02 12:03 PM
Lowered on H&R sports with KYB GR-2's -- ride quality is great.
27731, RE: Finished product pictures
Posted by OZ_GS, Jul-30-02 12:20 PM
WOW....that looks sooo nice. Have you seen the headlight paintjob on a red car? You are inspiring me but I would like to see it in red before I do it.

Chad
27732, RE: Finished product pictures
Posted by 97GS AT, Jul-30-02 01:18 PM
plain and simple, looks great!
Ken

5zigen rearsection/Cherrybomb glasspack resonator/Bosal header/injen short ram intake/bored TB/AFX UDP/Fidanza cam gears/Power Stop cross drill rotors(front)/shunk2 coilover/Koni adjustable (front)/KYB struts(rear)Konig V-racing front bar/rear upper bar/painted black Enkei RSF2 17" with Kumho/ Nakayamaprojectors /WW 3 pieces wing/interior mods


27733, RE: Finished product pictures
Posted by NappyEclipse, Jul-30-02 04:01 PM
WOW...That is one tight ride...Has anyone seen the headlights painted white to match a white car? If you did how did it look? And if any of you have a pic it would be greatly appreciated cuz i'm planning on clearing my corners and painting the headlights white this weekend. Thanks!
27734, RE: Finished product pictures
Posted by Ryan_Hes, Jul-30-02 05:21 PM
Thank you :-)
27735, RE: Finished product pictures
Posted by EclipseTical, Jul-31-02 12:26 AM
looking good man, and your sig is fawking beautiful. And whoever wanted to see red headlights, i think farmdogg55(?) has that done to his talon. IF thats wrong, my bad farmdogg. Looks really good whoever had it.
27736, RE: Finished product pictures
Posted by farmdogg55, Jul-31-02 12:48 AM
yep thats me!



ryan your car looks damn good now!


Cliff farmdogg54@hotmail.com
"All rice no race"
my Talon and me: http://members.cardomain.com/farmdogg55
When I'm done, Uncle Ben will be jealous!
27737, RE: Finished product pictures
Posted by OZ_GS, Jul-31-02 12:54 AM
Thanks guys!! Looks good... Opinions on wether or not I should paint my lights or just leave them stock.

The rest of my exterior is stock so I am all up in the air about it.



Chad
27738, RE: Finished product pictures
Posted by guest, Jul-31-02 01:24 AM
wow.

That's IT. I'm painting my headlites red now. That looks killer.
27739, RE: Finished product pictures
Posted by OZ_GS, Jul-31-02 12:38 PM
Well I decided to do mine tonight ... here are the pics.....I will probably end up repainting them because the paint I got did't quite match. Really close though. Just in certain light it looks more orange than the factory red.

Oh well here they are





Chad
27740, RE: Finished product pictures
Posted by NySpeed, Jul-31-02 02:08 PM
wow they look great!!!! how long did it take you and what method did you use? (oven, hairdryer...). Now i'm thinking of doing that myself. Just lazy to get out the headlights and take them apart....
27741, RE: Finished product pictures
Posted by OZ_GS, Jul-31-02 02:15 PM
Took about 2 hours total.....

I used my oven at 250 for 6 min.

- Got the lights out without taking the bumber off.
- Put em in the oven 250 for 6 min.

I did use high temp paint though.

One note though.... As I was puting them back on .... I did the bottom bolt first on one side got it tight and went to pull it out and the socket dropped into never never land. It was the only 10mm socket I could find. So I had to tighten the rest of them with a stinkin wrench. Not fun. I will be getting another socket tomorrow to find the one I lost.

Chad
27742, RE: Finished product pictures
Posted by NySpeed, Jul-31-02 02:24 PM
you said the color was off a little...did you use the ford red duplicolor hight temp paint? thats what i used for my brakes....i wonder if i use silver paint if i would get that "projector light" look.....
27743, RE: Finished product pictures
Posted by OZ_GS, Jul-31-02 02:26 PM
Yeah thats the color I used.....I also bought this paint intending to use it on my calipers. Its probably close enough for noone else to notice. In daylight you can't tell a difference but in artificial light it looks a little orange.

Chad
27744, RE: Finished product pictures
Posted by ez, Jul-31-02 02:34 PM
Your ride is awesome! :thumbsup

I guess this is something us black cars don't need to worry about doing though
27745, RE: Finished product pictures
Posted by OZ_GS, Jul-31-02 02:37 PM
Yeah I guess the rest of us are just trying to look as good as the stock black cars.....hehehe

Chad
27746, RE: Finished product pictures
Posted by sinesis333, Jul-31-02 10:23 PM
shit.....now I'm thinkin about this too.....I don't think any of us should worry about originality, since most of us live in different states.....thinking I might go blue with mine though.....or would that be too much? so far all this is blue:
side markers
calipers
all Mitsu emblems
foglight housings
interior lights
headlights
reverse lights
license plate lights

Yeah....I might be a little nuts.....thinking ocassionally about blue grafics too........Argghhhh!!!!! I always over do things....someone slap me!!!


~E~ 1999gs
27747, RE: Finished product pictures
Posted by thisismygs, Aug-01-02 12:29 AM
cyan painted his blue A WHILE ago. i think he was the first person i ever saw with his headlights painted. here is the pic:

27748, RE: Finished product pictures
Posted by John99RS, Aug-01-02 02:06 AM
Man Ryan, that looks very nice! You got a sweet ride there...:thumbsup
27749, RE: Finished product pictures
Posted by scothern, Aug-01-02 06:59 PM
Anyone know where I can get the A52 Mitsu paint in Ohio? Other the nSATAN?
27750, RE: Finished product pictures
Posted by 250lemans, Aug-01-02 07:34 PM
looks great man kinda like real expensive projectors
just an opinion you should get the plaque down on the air opening
27751, RE: Finished product pictures
Posted by Ryan_Hes, Aug-01-02 08:53 PM
It will soon be replaced by mesh, or an intercooler.
27752, RE: Finished product pictures
Posted by EclipzeGamer, Aug-01-02 09:01 PM
Ryan, what paint did you use? I love how that looks, especially on silver cars (or maybe i'm just biased having silver too, lol).



Jaeson
'96 Eclipse RS

Looks:
APC Euro clear bumper lens
front grill
chrome front emblem
Razo C/F pedals

Performance:
Perma-Cool oil cooler
custom airbox

On The Way:
Kaminari GTR wing off Shauns NER Eclipse
Hurricane_GS front & rear lower tie bars
95-96 side skirts
27753, RE: Finished product pictures
Posted by Ryan_Hes, Aug-02-02 08:29 AM
I've got the exact color code of my car (A52 Silver) in a spray paint can. I have a place here than can mix automotive paint and put it in a spray paint can form. If anyone wants some that is the exact code of your car. Just e-mail me with your color code and we can work something out.
27754, RE: Finished product pictures
Posted by UKlipse, Aug-03-02 02:53 AM
How did you guys remove your headlights? Where are the bolts located?
27755, RE: Finished product pictures
Posted by OZ_GS, Aug-03-02 05:23 AM
There is the bolt on top obviously. Two bolts on the back pointing forward. They are near the fenders.

And the tricky one is the one underneath the light housing. Once you get the others out just lift up on the light a bit and you can get a socket and extention on the bolt between the bumber and the light. Thats all of them.

Good Luck!!

Chad