I was wondering if there is a way I can wire my after mkt. fogs directly to the side lights or parking lights or if you guys have a good way to do this. I had a remote system but I think I fried the box or blew the little fuse that comes with it. ( long story ). If you could give me all the details you can I would really appreciate it. ex. where exactly should I look to wire these in?
thanks for any help I can get.

I was told to stick the wire into the fuse socket for whatever I wanted to hook it to, then clip the fuse back in on the wire. I didn't try that, but I'm still considering doing it.



Jaeson
'96 Eclipse RS

Looks:
APC Euro clear bumper lens
front grill
chrome front emblem
Razo C/F pedals

Performance:
Perma-Cool oil cooler
custom airbox

On The Way:
Hurricane_GS front & rear lower tie bars
95-96 side skirts

http://www.2gnt.com/cgi-bin/dcforum/dcboard.cgi?az=show_thread&om=1437&forum=DCForumID15&archive=

basically... power to 12v, ground to frame, and remote wire (w/ fuse) to the several places.. i used the center pin on the parking lights fuse (the fuse in the engine bay)... very simple install.. this makes the fogs turn on with the parking lights

thanks for the suggestions - I got it working, just replaced the fuse with one from the cars fuse box. Works perfect. Thanks again.