| Go back to previous topic | | Forum name | Interior/Exterior | | Topic subject | ::whine:: broken door handle, need help | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=26763 |
26763, ::whine:: broken door handle, need help Posted by loudgs, Jul-17-02 07:10 AM
Mitsu wont tell me how much just the door handle will be, but they say installed it's $115, I'm like BS!. Anyone know how hard it'll be to install myself? what's involved, also how much did the part cost to get from Satan? It always happens when you least expect it......dammit.....was at 711 grabbin some ciggies and POP! I wasnt even pulling hard, just opening the door! I've always been careful! WAAAAAAAHHHHH!
|
26764, RE: ::whine:: broken door handle, need help Posted by Weezle745, Jul-17-02 07:37 AM
i payed $65 for mine. U can install it yourself, i did. Its kinda tricky so have a chiltons manual just in case. Is the $115 for painting it also? I doubt it but if so, then thats a good deal.

|
26765, RE: ::whine:: broken door handle, need help Posted by loudgs, Jul-17-02 07:49 AM
yea, it's 115 painted........pisses me off cause they're saying it's going to have to be special ordered....5 to 7 days, dayum, drivers side too
|
26766, RE: ::whine:: broken door handle, need help Posted by Weezle745, Jul-17-02 08:09 AM
DUDE go for it! $115 for the handle + paint + install = Very good deal especially from a dealership. I would of paid that when my handle broke.

|
26767, RE: ::whine:: broken door handle, need help Posted by loudgs, Jul-17-02 08:13 AM
I'm poor dude, I'd rather go for an aluminum dash kit than pay for a door handle, kinda depressing, but oh well, just did a search...which I should have done in the first place, and found a write up on how to do it with epoxy for 5 bucks....much more in my budget
|
26768, RE: ::whine:: broken door handle, need help Posted by 9D9 MITSU RS, Jul-17-02 09:26 AM
What color is your car? I have 2 doors off a 99 GS. The color is black.
|
26769, RE: ::whine:: broken door handle, need help Posted by loudgs, Jul-17-02 09:36 AM
car's red but black wouldnt look too bad, I've having the whole car repainted soon anyhow, how much do ya want for em? I need em fast! well, for the door handle assemblies anyhow, not the whole doors if possible
|
26770, RE: ::whine:: broken door handle, need help Posted by ghost, Jul-17-02 10:49 AM
loudgs:
Yo bro....I tried the epoxy solution and it went POP again. Unfortunately, if you don't get the absolute best epoxy and have it fitted perfectly, chances are it's going to break again just because the amount of force that is constantly being pulled on it by the springs.(or whatever they are) It'd make a temp fix maybe if you can get it to work...but I'd still have the handles on order ready for when you repaint the vehicle. That was my mistake and now I'm having to try and track down handles so I can get repainted before summer is over!!!! :(
|
26771, RE: ::whine:: broken door handle, need help Posted by loudgs, Jul-17-02 10:50 AM
true that, well 9D9 Mitsu....gimme an email at rrchris@gt.rr.com, I'll buy em from ya, just hit me over wit a price
|
26772, RE: ::whine:: broken door handle, need help Posted by ghost, Jul-17-02 10:50 AM
>What color is your car? I have 2 doors off a 99 GS. The >color is black.
Will the door caps fit a 95-96 model? Mine are broken...if so, let me know! And if he doesn't take the door handles, I will. :)
|
26773, RE: ::whine:: broken door handle, need help Posted by loudgs, Jul-17-02 10:51 AM
heh, that's funny, we posted at the same time
|
26774, RE: ::whine:: broken door handle, need help Posted by ghost, Jul-17-02 10:59 AM
Yah you beat me to it, biaaatch! ;) j/k
Nah, he presented the offer to you so of course they're yours. I want the door cap(s) though! }>
TIA
|
26775, RE: ::whine:: broken door handle, need help Posted by xeraxes, Jul-17-02 02:24 PM
just happened to me too the other day... whats up with this???
|
26776, RE: ::whine:: broken door handle, need help Posted by iamnotwhoiam, Jul-17-02 03:32 PM
this should be a recall for satan to fix.
|
26777, RE: ::whine:: broken door handle, need help Posted by ghost, Jul-18-02 02:43 AM
Yeah, how do we go about starting that recall shit? }>
|
26778, RE: ::whine:: broken door handle, need help Posted by 9D9 MITSU RS, Jul-18-02 06:34 AM
I e-mailed u. If you don't get it soon, hit me. eclipse_9d9@hotmail.com
|
26779, RE: ::whine:: broken door handle, need help Posted by loudgs, Jul-18-02 07:15 AM
I was checkin it out, brought it to my friend last night who does my body work for me, he looked and said there was an older crack, you can notice if you look at the break, it'll be dull, and alot of newer cracks that happened all at once, they'll be shiny, this is definitely a manufacturer screw up, y'all think we should talk to consumer reports or something?
"if something breaks once, shit on me, if it breaks twice, I shit on you"
EDIT: still didnt get the email yet bro...ggrrrrr dang email servers
|
26780, RE: ::whine:: broken door handle, need help Posted by 9D9 MITSU RS, Jul-18-02 01:21 PM
I dunno how much shipping would be on it, but you have 1st call. make me an offer thru e-mail and we'll work it out man. eclipse_9d9@hotmail.com
|
26781, RE: ::whine:: broken door handle, need help Posted by ghost, Jul-18-02 02:17 PM
Isn't there some sort of site that has information about TSB's and recalls?
Something might be noted in there as a TSB?
I don't know...but this is some fuckin' bullshit. It happens so much, it is the manufacturer's fault and everyone knows it, but they won't admit it. We just keep getting shafted! Yes I'm angry because I'm a victim of the pussy door handle scam too!
}> <----- Mitsubishi
:D
|
26782, RE: ::whine:: broken door handle, need help Posted by loudgs, Jul-18-02 02:46 PM
I checked on the internet that has all the TSBs for our car, you know there's one about all the freakin rattles in our cars?! I was amazed! Anyway, nope they dont have one on the list for the handles. I'm reporting this to consumer reports, and please, anyone who's had this happen do it with me cuz if we can get a recall, that'd be great, I wouldnt have to worry about being gentle with my car, sssheeeeeat, I have to baby my doors, but I drive the shit outta my engine, that's sad, by the way, everyone needs the heads up on this, here's the list of ALL TSB's and RECALLS! http://www.alldata.com/TSB/9939_mo.html just pick your car, year, and it shows them all, screw mitsu, MUAH!
|
26783, RE: ::whine:: broken door handle, need help Posted by loudgs, Jul-18-02 02:49 PM
you got mail 9D9
|
26784, RE: ::whine:: broken door handle, need help Posted by loudgs, Jul-19-02 05:42 AM
ghost, you need the drivers side or passenger side? I'm just putting both his black ones on my car to keep it uniform, anyways my passenger side is in perfect condition, let me know man
|
26785, RE: ::whine:: broken door handle, need help Posted by ghost, Jul-19-02 09:24 AM
Mine is the driver's side too :( :( :(
|
26786, RE: ::whine:: broken door handle, need help Posted by xeraxes, Jul-20-02 06:33 AM
yah i went to the dealership the other day and i asked him about a recall on it. he said mitsu wont recall form some bs reason. he said something about how it cracks every time you open the door and it slips out of your hand. every time you do that it gets more and more cracks. its bs cause obviously they werent made out of quality parts and material cause it just shouldnt crack in the first place.
|
26787, RE: ::whine:: broken door handle, need help Posted by jdpilot, Jul-20-02 09:36 AM
Mine went last August. My local SATAN has a body shop in house. I went through the body shop guy. Get this. $45 for the handle installed and all. Now heres the funny part. I don't know if he went through an other than OEM distributor but he said they come color keyed appropriatelty! Interesting isn't it? IT DID NOT HAVE TO BE PAINTED!
|
26788, RE: ::whine:: broken door handle, need help Posted by loudgs, Jul-20-02 10:36 AM
yea, 9D9 had a problem getting the handles off due to the power window assembly...being that I have power windows I'm thinking about getting mitsu to do it, price quote is still $115, where do you live at? I'd pay $45 and take a road trip
|
26789, RE: ::whine:: broken door handle, need help Posted by xeraxes, Jul-20-02 11:07 AM
i paid 100 to get it done locally
|
26790, RE: ::whine:: broken door handle, need help Posted by loudgs, Jul-22-02 07:27 AM
wwweeeelllll, good ole Mitsu lied to me, when I actualy got down there, they told me they had black ones in stock and to paint it would be an additional 75, buuuuut, they originally said 115 for it all? nuh uh, 115 just for labor, 75 for the part and 75 paint, SCREW THAT! I'm just gonna get a door pop kit I think and epoxy my handle on for aesthetic reasons, 9D9's havin trouble gettin his handles off, when he gets back next week I'm still gonna get em, I just cant go thru the passenger side any more, ya cant pimp when you have to do that now!
|
26791, RE: ::whine:: broken door handle, need help Posted by loudgs, Jul-23-02 11:16 AM
hey ghost, I just went to my body shop guy and he said w/ part installed everything AND painted 98 bucks, check out some body shops, they normally hook ya up
| |