I had my Indiglo gauges for a while and wanted to know how and where to put the wiring i got the gauges on already and if anyone have pictures it would help.

ok well I don't have any pictures for you, but what you wanna do with the positive and negitive is run them to the terminal behind the fusebox...this is the correct way. I didn't do it the correct way I did it the 1/2 ass way, but all I did is took the + and - and put them under the blades of one of the fuses in the fusebox. I don't remember which fuse I put it under at the moment...but you know how fuses have the 2 teeth well all you have to do it is remove the fuse you are going to place the wires under and place the + under one tooth of the fuse and - under the other, then press it back into the fusebox the whole way. If it doesn't work then you have it backwards and just reverse the two wires. Hope this helps you out.

This might help.
http://www.turbogs.com/indiglo.htm

Thanks for the information

On the positive and negitive wires from the indiglo should i splice it or just leave it alone?