There are 2 wires from the fm modulator one is yellow and the other is red both with a built in fuse in the line. Where do they go to?

thank you

nevermind

thanx ????

I'm sure they are power wires but where do they connect to....? 2 wires i dont get where they go?

tia

1's power, the other is ACC- if i remember correctly, the red is ACC and yellow is power...

Evan B
97 GS
Stamford CT
EvMan2345@aol.com

i was thinking red is power and yellow is negative

but i think the other dude is right because you gotta have something to turn it on and off with your radio

maybe red is acc and yellow is negative. you could probably use this setup, i dont think it would need its own power source, except an acc, which should be sufficient

wait till xtremeRS sees it, he'll know

nope, In most car audio the yellow is the constant power such as a direct conection to the battery. And the red is a power wire that is used when the ignition is on. Thats why they both have fuses, ground almost never have a fuse on them.

what ^^^ said.



-Tony '98-GST
eclipzgst@charter.net
http://eclipzgst.webhop.net
turboclipz on AIM

dave didn't the changer come with directions or at least a scyamatic (yes i know the spelling is probably off)

No it didn't, a friend of mine gave it to me...as is. I think hondahater is right, now I know where the constant power is, I just have to find the ignition wire?

tia