| Go back to previous topic |
| Forum name | Interior/Exterior |
| Topic subject | 95 to 97 |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=24175 |
24175, 95 to 97
Posted by JuniorGSX, Jun-14-02 05:50 AM
Hey People
Does enybody know if the 97 front and rear bumper cover will fit the 95 mitsubishi eclipse. Thanks
|
24176, RE: 95 to 97
Posted by SunBlocker, Jun-14-02 06:22 AM
Yep. Your headlights will be different though. You will need projector headlights or some stock 97-99 headlights.
|
24177, RE: 95 to 97
Posted by JuniorGSX, Jun-14-02 06:32 AM
I'v got the projectors. So what you say is that the bumper will be a perfect bolt on after i change the headlights???/////
Thanks
|
24178, RE: 95 to 97
Posted by SunBlocker, Jun-14-02 08:35 AM
If I am not mistaken it should be a direct bolt on.
|
24179, RE: 95 to 97
Posted by JuniorGSX, Jun-14-02 10:38 PM
Thanks Greg
|
24180, RE: 95 to 97
Posted by CVedEclipse, Jun-14-02 11:52 PM
exact bolt-up (with the 97-99 sized headlights).. been done by quite a few (including me) on this board!
|
24181, RE: 95 to 97
Posted by fauchpj, Jun-15-02 06:42 AM
:thumbsup
|
24182, RE: 95 to 97
Posted by HeDog, Jun-15-02 09:18 AM
They're both a direct fit, but don't get pissed off when you start to snap the bolts that are holding on the bumpers right now. When I swapped mine, I bet I snapped at least half a dozen of 'em. It probably depends on where in the US your car's been. If it's seen winters with salt & crap, you'll probably snap quite a few. Then you'll have to drill out & retap the threads x(. Good luck if you decide to do it. :thumbsup
|
24183, RE: 95 to 97
Posted by CVedEclipse, Jun-15-02 01:11 PM
>They're both a direct fit, but don't get pissed off when you
>start to snap the bolts that are holding on the bumpers
>right now. When I swapped mine, I bet I snapped at least
>half a dozen of 'em. It probably depends on where in the US
>your car's been. If it's seen winters with salt & crap,
>you'll probably snap quite a few. Then you'll have to drill
>out & retap the threads x(. Good luck if you decide to do
>it. :thumbsup
so damn true!!! i broke off a couple and i need to fix one side that is sagging a bit..
|