| Go back to previous topic |
| Forum name | Interior/Exterior |
| Topic subject | Oil Temp gauge install |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=23920 |
23920, Oil Temp gauge install
Posted by Da0utlaw, Jun-10-02 06:23 AM
Wasn't sure where this post should go. I have an oil temp gauge and was going to install it in the driver door vent(from the mods section)but where do i install the temp sensor at and what wire should i splice into to have it light up when i turn on my dash lights? TIA
"...you didn't have a chance,like my two aborted babies..."
UNDER CONSTRUCTION
http://www.streamlineracing.com
|
23921, RE: Oil Temp gauge install
Posted by John99RS, Jun-10-02 06:57 AM
Hey, you can follow the same steps for the oil press gauge in the mods section.
|
23922, RE: Oil Temp gauge install
Posted by Da0utlaw, Jun-10-02 07:13 AM
I don't see one for Oil temperature just oil pressure.
|
23923, RE: Oil Temp gauge install
Posted by John99RS, Jun-10-02 10:27 AM
Yeah I know, but you can install it the same way in the same place. You'll just be installing a temperature sensor instead of a pressure sensor. The fitting might be a different size though. You just need to find a source for oil that's all.
|
23924, RE: Oil Temp gauge install
Posted by Da0utlaw, Jun-10-02 10:38 AM
Ok cool, so my next question is if i wanted to install an oil pressure gauge too how would i do that since the temp sensor would already be in the place the press. sensor would go?
|
23925, RE: Oil Temp gauge install
Posted by Ichiban, Jun-13-02 06:05 AM
I tapped my gauge illumination power and ground leads to my lighter illumination. Pretty simple.
|