My new projector lights, yeah get jealous!!! They are bright as HELL. Apparently they fixed the "I cant see for shit" problem with the newest version of the projector lights.


I used vinyl spray for the door, used to be beige.


Me and my car, nice to have my front bumper back. The mirrors are now white too.


People ask me what the rear looks like, it looks stock because it is. I dont like any of the rears out there. Waiting for one.


Another shot...



Side shot, check out how the roofscoop goes all the way back.

NICE!!!! :thumbsup



________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

mad props on the roofscoop and projectors man, too bad I have a sunroof....grrrr

REALLY NICE!!!! Im a big fan of your car, one of my favorites on the board. :thumbsup

Thanks guys :)

Looks real nice. It's clean and simple, and I like the fact that you don't have graphics all over it. Only thing is, I would "really" get any rear bumper, even if I didn't like it heehe. I think it just looks a little incomplete without a rear, especially with the roof scoop and all. But it still looks good without a rear.

Im with you Nick... I havent seen a rear that I like so far. They basically all look the same. I personally think the stock rear end looks fine.

doesnt that scoop create drag?

where did you pick up those projectors at?? and if you don't mind me asking, how much where they?

Hey Niclipse....what kind of side skirts are those, if you dont mind me askin..??
Thanks


i need to be dropped..

those are blitz side skirts

Ken

5zigen rearsection/Cherrybomb glasspack resonator/Apex'i
cone intake/AFX UDP/Fidanza cam gears/Power Stop cross drill rotors(front)/shunk2 coilover/Koni adjustable (front)/KYB struts(rear)Konig V-racing front bar/Enkei RSF2 17" with Kumho/ Nakayama
projectors /APC Clear tail light and interior mods

where are your fog lights and white wiper arms?

Ken

5zigen rearsection/Cherrybomb glasspack resonator/Apex'i
cone intake/AFX UDP/Fidanza cam gears/Power Stop cross drill rotors(front)/shunk2 coilover/Koni adjustable (front)/KYB struts(rear)Konig V-racing front bar/Enkei RSF2 17" with Kumho/ Nakayama
projectors /APC Clear tail light and interior mods

aww, I liked the beat up look:( but is looks a hell of alot better! How many tail lights have you been thrw? I got a set of clears now! But I duno if Im gana put them on

"Looks real nice. It's clean and simple, and I like the fact that you don't have graphics all over it. Only thing is, I would "really" get any rear bumper, even if I didn't like it heehe. I think it just looks a little incomplete without a rear, especially with the roof scoop and all. But it still looks good without a rear."

hehe, you have the opposite. a stock front and aftermarket rear. i know you used to have a different front, though

hey...what kind of light bulbs using there? H3 and H1?

Ken

5zigen rearsection/Cherrybomb glasspack resonator/Apex'i
cone intake/AFX UDP/Fidanza cam gears/Power Stop cross drill rotors(front)/shunk2 coilover/Koni adjustable (front)/KYB struts(rear)Konig V-racing front bar/Enkei RSF2 17" with Kumho/ Nakayama
projectors /APC Clear tail light and interior mods

Lookz good Nick, now you'll finally let me get a close up look of your car? BTW, I got a friend who is sellling some 8" hella's (I think thats the size for about 30 bucks) let me know, he lives right by BCC Melbourne, later





ALL STOCK!! except for this extra radiator in front of my stock bumper

that is one SWEEEET RIDE :thumbsup
looking up to ya my man
hey dude i grive in envy :angry
wish i had those lights how much were they and where ya get them dude
ill getr them soon as i find a good bumper

I believe they are H3 bulbs.

>hehe, you have the opposite. a stock front and aftermarket
>rear. i know you used to have a different front, though


hhaha ya that's very true. I was gonna finish up my custom front, but never had the time. Now I don't think I'll be getting any front since I will be selling the car in one year. It's a lot easier driving with a stock front though :)

props ;-)

TJ, i've had a total of 4 types of altezzas. :)

>where are your fog lights and white wiper arms?
>
>Ken
>

I ditched the white wipers shortly after my first set of pictures a while back. My foglights (new ones) just showed up in the mail today.

damn.. your car looks badass!! much props! and those projectors are sweet looking.. those would be the only headlights that i have seen that look just as good, if not better, than the stocker 97-99s

Hey Nick! What kind of projector light is that?

They are the APC Gen 3 projectors. =)

what knid of bulbs they use?

Ken

5zigen rearsection/Cherrybomb glasspack resonator/Apex'i
cone intake/AFX UDP/Fidanza cam gears/Power Stop cross drill rotors(front)/shunk2 coilover/Koni adjustable (front)/KYB struts(rear)Konig V-racing front bar/Enkei RSF2 17" with Kumho/ Nakayama
projectors /APC Clear tail light and interior mods

nice.... kinda reminds me of my car (hehe)... hey what fog lights did you decide on?

so where did you buy the projectors???

I did a search on yahoo and found a store that sells the g3's, I would just give you the link to the store, but my computer in my room has a virus and wont boot up.

BY THE WAY!! I must warn you guys, the new G3 projectors DO NOT come with built in wiring like your factory headlights. They also DO NOT have the full casing, they do not come with the black plastic part that fits in the car. (hard to explain but there is a major water risk.... ya know when you want to change your bulbs the light gray cover you have to twist off to do so, well that whole black casing is not included and next to impossible to remove from your factory headlights.

You must cut your factory wiring out of your factory headlights and pull them threw and reconnect them on the new headlights. (SUCKS)

And another thing... The projectors do not fit seamlessly! The new generation lights come with a 4 contraptions, one for each bulb that also has four screws. You have to tighten these or the light wont go all the way in. The tower these screw into is plastic and strips out. I have them all in as tight as they will go, and there are gaps on both fenders that must now be filled with bondo.

Some fuckin bullshit eh? The bright side of the story is, hey they look great and they are bright as hell.

Y2ECLIPSED: I got the 7" maxtels for $52 shipped to my door. They are NICE!!!

Everyhting looks great thanks for the pics. would you recomend the projectors?

Also what do you know about probe seats in an eclipse? They bolt in or modded or what? anyother car's seats fit?

tia

I would still recommend them, just be prepared. It has rained here and i have already gottena small amount of condensation in one of the housings. I think anyone that buys they will get a fender gap also, so be prepared for needing to fix that too.

And as for the probe seats, i imagine that if you took them and their brackets they would fit. Eclipse seats are pretty damn wide and probes look thinner.

Much better seat, IMHO. Especially if you can get two with the electronic hug. (hugs you like a racing seat)

I wanna get those and leather em.

thanks for the information