Go back to previous topic
Forum nameInterior/Exterior
Topic subjectWW custom 3 pieces mid wing
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=20942
20942, WW custom 3 pieces mid wing
Posted by 97GS AT, Apr-28-02 02:59 AM
I found it $325 shipped in this site:

http://www.digitalracer.com/catalog/category_product_detail.asp?pid=4564

Anyone find a better deal than this? I want to get one.

Ken

5zigen rearsection/Cherrybomb glasspack resonator/Apex'i
cone intake/AFX UDP/Fidanza cam gears/Power Stop cross drill rotors(front)/shunk2 coilover/Koni adjustable (front)/KYB struts(rear)Konig V-racing front bar/Enkei RSF2 17" with Kumho/ Nakayama
projectors /APC Clear tail light and interior mods


20943, RE: WW custom 3 pieces mid wing
Posted by Chowmane99, Apr-28-02 04:45 AM
That's a Good Price. I have that wing on my 98 Eclipse Spyder GS and Love it. Everybody wants to know where I got it. It will get looks. The OEM Turbo Spoiler looks nice too but the OEM 3-piece mid spoiler sucks. It's so little. If you have the factory 3 piece spoiler your going to have to get that middle hole covered and painted when you install this spoiler.

I haven't seen any other Eclipse with this spoiler on the road (That's Good - I'm Special but I've seen several Integra's with the same spolier and some civics too).

I got mine for $300.00 total 3 years ago - So $325 now is Awesome.
Cost me $150.00 to paint / install / and fill in that stupid hole on the trunk lid.

Later,
Mike
98 Eclipse Spyder GS.
20944, RE: WW custom 3 pieces mid wing
Posted by 97GS AT, Apr-28-02 08:20 AM
is that wing fit the stock holes on the left and right size? any additional holes needed? there is only one hole left in the trunk right? thx

is $300 invclude shipping cost?

Ken

5zigen rearsection/Cherrybomb glasspack resonator/Apex'i
cone intake/AFX UDP/Fidanza cam gears/Power Stop cross drill rotors(front)/shunk2 coilover/Koni adjustable (front)/KYB struts(rear)Konig V-racing front bar/Enkei RSF2 17" with Kumho/ Nakayama
projectors /APC Clear tail light and interior mods


20945, RE: WW custom 3 pieces mid wing
Posted by Chowmane99, Apr-28-02 08:25 AM
Yes it will fit the stock holes on the left and right side. You only have to get the middle hole filled. The problem is that after you fill the center hole - you probably have to get the whole trunk painted (Same price as just painting around the hole)

Other then that - that's it.

I love my 3-Piece Mid Spoiler. It's VERY NICE.

Hope that helps,
Mike
98 Eclipse Spyder GS
20946, RE: WW custom 3 pieces mid wing
Posted by 97GS AT, Apr-28-02 08:40 AM
so it was $300 shipped to your door? no additional holes? cool.

Ken

5zigen rearsection/Cherrybomb glasspack resonator/Apex'i
cone intake/AFX UDP/Fidanza cam gears/Power Stop cross drill rotors(front)/shunk2 coilover/Koni adjustable (front)/KYB struts(rear)Konig V-racing front bar/Enkei RSF2 17" with Kumho/ Nakayama
projectors /APC Clear tail light and interior mods


20947, RE: WW custom 3 pieces mid wing
Posted by damasta, Apr-28-02 09:18 AM
I asked this questio before, about the holes, and eclipse804 told me it covers 2 of the holes but not all 3 and I don't think it uses the stock holes. I could be COMPLETELY wrong and I DO NOT want to put words in eclipse804's mouth, so I won't swear that it was him that told me but I think it was. Give him time to reply.

Coo'
alex_ries@hotmail.com


20948, RE: WW custom 3 pieces mid wing
Posted by FlyinEsi, Apr-28-02 09:51 AM
I got you a better price...check this out...

www.asylumms.com

click on (left side)
-Import
-Mitsubishi

Flash window at top
-95-99 Eclipse
-Wings

They will price match anything you find on the web...give them a call and bust their balls about a better price.
20949, RE: WW custom 3 pieces mid wing
Posted by LoudEclipse, Apr-28-02 10:35 AM
yea, dude, pay the extra money not to go thru asylumms, they laaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaag, its not worth it



20950, RE: WW custom 3 pieces mid wing
Posted by 97GS AT, Apr-28-02 10:54 AM
I checked the asylum be4, they are asking $299 + shipping for the WW 3 pieces wings, I don't know what 's the ''Neo'' tho, is that some kind of repica? just $20 cheaper than the WW one?
anyway, I just ordered one from the digitalracer.com already.
Ken

5zigen rearsection/Cherrybomb glasspack resonator/Apex'i
cone intake/AFX UDP/Fidanza cam gears/Power Stop cross drill rotors(front)/shunk2 coilover/Koni adjustable (front)/KYB struts(rear)Konig V-racing front bar/Enkei RSF2 17" with Kumho/ Nakayama
projectors /APC Clear tail light and interior mods


20951, RE: WW custom 3 pieces mid wing
Posted by eclipse804, Apr-28-02 11:35 AM
>I asked this questio before, about the holes, and eclipse804
>told me it covers 2 of the holes but not all 3 and I don't
>think it uses the stock holes. I could be COMPLETELY wrong
>and I DO NOT want to put words in eclipse804's mouth, so I
>won't swear that it was him that told me but I think it was.
> Give him time to reply.

Actually, I think I was talking about the rudora replica wing that I sell. For the WW 3 piece, I can't honestly remember if it covers all the holes. I think it does, because it even has a hole cutout for the antenna to go through. The center hole will still show though. I can't seem to remember whether Eric C still had holes on the side. I thought that he did. But I can't remember anymore...
20952, RE: WW custom 3 pieces mid wing
Posted by Chowmane99, Apr-28-02 12:20 PM
Why Would Anyone Doubt Me. Hello - I Have this Wing on My 98 Eclipse Spyder GS.

The Guy that Installed and Painted it for me showed me how it was going to fit before he did anything.

Crazy Kids now a Days. LOL

Get it from WW. You get what you pay for. Mine was all prep and ready to be painted.

Later,
Mike
98 Eclipse Spyder GS
20953, RE: WW custom 3 pieces mid wing
Posted by 97GS AT, Apr-28-02 12:29 PM
does that matter if I order WW 3 pieces at different place? Will I get the same quality?

Ken

5zigen rearsection/Cherrybomb glasspack resonator/Apex'i
cone intake/AFX UDP/Fidanza cam gears/Power Stop cross drill rotors(front)/shunk2 coilover/Koni adjustable (front)/KYB struts(rear)Konig V-racing front bar/Enkei RSF2 17" with Kumho/ Nakayama
projectors /APC Clear tail light and interior mods