I seen this guage pod and want mine to look just like it, what exactly do I need? Please be specific and include all materials needed to have my dash look like

this.http://www.sounddomain.com/member_pages/view_page.pl?page_id=28230&make_type_query=make%3DMitsubishi&model_brand_query=model%3DEclipse&tree=Mitsubishi%20Eclipse

tia

You can get the intelliglow needle kit from www.importintelligence.com. I have the blue kit, it looks nice, but it was a painin the ass to install. The ring might be from the needle ki, but i'm not sure cuz i don't have one, if not it might me the trim cord from importintelligence

thats koolades car.. hes on this site, not sure how often anymore, but hes around. looks like the importintellegence kit to me. not too hard to install, but a little pricey. i have them and love em, but i prob could have made my own. i know there are several on this site that have done them w/o the kits

yup those are indiglow needles and it looks like crome trim rings that gave it the halio. I have the needles if some1 wants to buy them $65 to you door

So all it is is the needles with some chrome rings?

How does his dash light up in the backround its all blue? to match his needles.

I spoke with koolade on msn messenger last night but he was on a time schedule, he's selling his car and getting an m3.

tia

I remember him telling me something about blue LEDs that made all his accessory lights light up. You know your rear defrost and and everything else that lights up at night? How do I get all the backround blue instead of the stock orange?

tia

Ok, I just read the post a couple posts down from this and whats an HVAC? All I need to do is replace the bulbs behind the stock accessory bulbs with blue aftermarket bulbs? What bulbs do I need?

TIA

ok, here is the link for the gauges.........
http://www.angelfire.com/fl5/import/mods.html

and the HVAC (heating ventalation air conditioning)........
http://www.geocities.com/hondahater21/LedHVAC.html

If you have any Q's feel free to email or post Ive tore aprat the gauges a tone of times so If you need to ask go for it

PS I do have indiglo needels for sale to

Hey Honda,

I went through your tutorial and everything went well but I wanted to change it to red so I got a Red LED at 1.7 volts and 3000mcd. But I'm not happy with the brightness. Is there any way to get a bigger/lighter LED in there?

Thanks,
Fearless

you can try one with a hight mcd or try the varad leds, there alot brighter than the raidoshack ones

Are you sellin the blue needles and blue HVAC bulbs?

I have the indilgo needle kit and if u want I have a hvac led too

How much work am I looking at when doing the blue HVAC led conversion?

How much you want for the needles and blue HVAC leds? Why you gettin rid of them?

tia

changeing the hvac is only a 30 min job it isnt to hard, the needles are about 1 to 2 hours of fidleing with the needles. Im selling the needles cause Ive made my own. $70 for everyting shipped to ur door. the needels come with all the instrutions on how do do everything so it isnt to hard

Do I have to rip apart my dash to install the HVAC bulb? Is it just 1 blue bulb or a few of them?

all you have to do for the hvac is take off the uper air vent, it it really simple. There is only one bulb to replaec

just look at his write up.. it was well done with pics.. your thinking too much into this.. it was very easy. and the needles are easy too.. just follow directions and you will be fine... and of course you could always ask here with questions.. but like i said.. you should have no problems.

I jus bought the import intelligence kit and the blur polarg bulbs they sent me seem to be too big to fit anywhere.....Did they send me the wrong ones or am i just dumb?? :)

hondahater- I can buy them off you next week.. now how will I get the dash behind the guages to glow, you said a chrome ring do you mean just a ring that goes over my speedo?

Hey thats cool, What I ment by the crome rings is there was a blue ring around the gauges, it was the reflection of the needels off the rings. But while u have the needels of the install them, you can make the numbers on ur gauges white or blue

no importintelligence is retarded.. i did the same thing and told them about it and said they should correct their statement on the bulbs on their site.. but they didnt.. i dont know what they were smoking when they thought those bulbs went in our gauge cluster.. i dont know what the exact size of the gauge bulbs, and i dont know and doubt if colored ones are made for that size bulb.. they only thing you can do is rig up some leds back there, but you will have to do more than just swap out the bulbs and when i have the time ill try and explain it and im trying to help out where i can.

Well then explain it.. I want my guages to glow like yours next to your sig..

?

oh ok, well with the needels or making ur own kit, that will change the color of the needel, but to get ur numbers blue there are to ways, on his sig and on my car I convereted to leds to change to color(somewhat pain in the butt) the easy way is when you put the needel kit on, take of the factory overlays and hold them up to the light, you will see that they are orange, if you take 230 grit and sand the back off where the numbers are. Hold it up to the light and sand untill you see no more orange. Next you can eaither get a light "gel" and place it inbetween the plastic and the gauge. You sould be able to find this in a party suply store or stage lighting. Its like a thick pice of sawran wrap thats ment for hight temp lights. Or the gehto rute is to take a blue sharpe maker and coat the back of the gauges evenly 3 times and that will give you a nice blue glow.
Hows that?