How do you take it off? I want to install my grill kit.

http://www.kaptainmyke.com/FAQs/frntbumper.htm

however that is out of date..i need to update it badly...for the bottom bolts under the headlites (1 each for both headlites) You will need to get a real long socket extension and tuck it between the top of the bumper and the bottom of the headlite. Then you can loosen it easily and then remove the headlite.


When you have the headlites put back in...DONT tighten those top screws all the way or they will strip easily!

The hard part is removing the stock bumper. Once it's off, it's cake working on the front end of you car from now on until you never own it again. I would recomend NOT breaking off the headlites and I also recommend keeping your re-enforcement bar and re-attaching the bottom bolts of the headlites....

tia

How long did it take you to do this?

>When you have the headlites put back in...DONT tighten those top >screws all the way or they will strip easily!

haha I 2nd that I learned the hard way and broke the screw off and had to drill a new hole for my projectors.

it took me maybe 2hrs tops , keep in mind i had no idea what i was getting into. at least you got a head start, bra.

btw..i was wondering how i was gonna get my pass headlite off now since its stripped inside there...i guess imma drill a new hole like u did, thanks for the idea.

:)

I don't know how your front ends are on but on my 95 I ripped out those damn plastic things and got bolts and bolted my bumper back on. And since I didn't feel like putting all 4 bolts onto my headlights I only put in the two easiest bolts.

I just got done. It took 5 hours. I also had a friend too. the four plastic clips on the top of the bumper(underneath the headlights) I dont even replace. I couldn't remove my headlights