| Go back to previous topic | | Forum name | Interior/Exterior | | Topic subject | Question on blitz front end | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=18476 |
18476, Question on blitz front end Posted by DocWhiplash, Mar-29-02 07:49 AM
I just got my Blitz front put on and I had my Intrax springs off for the winter but the front end seems to be a little lower than stock. Will I have any problems bottoming out the front end with the intrax springs when I put them back on. Or should I go with the prokit springs.
|
18477, RE: Question on blitz front end Posted by vegasdsmr, Mar-29-02 08:38 AM
welp, im on intrax, and i dread the day i slap my blitz front on.. i already have had to make a ramp to get into my driveway :(
my intrax drop killed all my wheel gap, i am about 4or 5 inches off the ground where the front fender is closest to the dr side or pass wheel.
fusion has a blitz front, and he said it is about 1 or 2 inches lower than stock... if u have a pre97 bumpa, then it will be even more of a change since the corners of that bumpa bend up, while the 97+bumpas chill all the way to the ~90degree angle.....
good luck... im down to hear how itt looks, and the ride height when u install dat shiot...
tia
|
18478, RE: Question on blitz front end Posted by shuwa29, Mar-29-02 06:05 PM
i was looky with the street fighter and on 18's with the spring springs. it said 2 inch drop, and now i'm only 4.35 inches off the ground in the front. so it seems that alot of people end up staying around 4-5 inch area after lowering and adding fronts. later
| |