Go back to previous topic
Forum nameInterior/Exterior
Topic subjectWhere 2 Find Sensei body kit or just front, blitz sides & rear, mr2 vent
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=11895
11895, Where 2 Find Sensei body kit or just front, blitz sides & rear, mr2 vent
Posted by xEclipsE RaceRx, Jan-11-02 09:46 AM
Anyone know where to find a cheap Sensei body kit, I think its also referred to as the evolution body kit. I really just need the front bumper, im planning on putting blitz side skirts and rear,and also sum MR2 vents, can anyone help me out, and how much did it cost everyone to get theirs installed and painted? Im trying to get an estimate on how much I will be needing to save up. Thanx
11896, RE: Where 2 Find Sensei body kit or just front, blitz sides & rear, mr2 vent
Posted by JJPhatStrat, Jan-12-02 12:28 AM
try here:

http://www.mbautosport.com/product_category_bodykits.asp?mdlid=22&yr=1998

good luck!
11897, RE: Where 2 Find Sensei body kit or just front, blitz sides & rear, mr2 vent
Posted by icedout, Jan-12-02 03:28 AM
you know when you buy a cheap kit it is exactly what your going to get. You will probably spend more money fixing the kit. Most kits just don't slap on and get painted. If you get a shitty kit it has to be altered to fit the car and this takes time and money if you want it done right. I suggestion to you is find I company that hand lays the fiberglass and doesn't spray it into the mold. The spray type are mass produced and also uneven in thickness. They are also not allowed to dry properly in there molds and tend to take a different shape if not allowed to cure properly. So in the long run find a good body kit it will save you money and headaches in the long run
11898, RE: Where 2 Find Sensei body kit or just front, blitz sides & rear, mr2 vent
Posted by xEclipsE RaceRx, Jan-12-02 02:37 PM
Is urethane good? Is that the hand laid thing you were talkin bout?
11899, RE: Where 2 Find Sensei body kit or just front, blitz sides & rear, mr2 vent
Posted by eclipse804, Jan-12-02 05:50 PM
Urethane is more flexible than fiberglass. Stock bumpers are urethane. But if it doesn't fit right, it's not modifyable like fiberglass is. Fiberglass can also be customized, and paint goes on it better, but if you hit anything, or scrape too hard, it will crack. But to me, since fiberglass kits are so much cheaper than urethane, I think that fiberglass is the best choice.
11900, RE: Where 2 Find Sensei body kit or just front, blitz sides & rear, mr2 vent
Posted by flossinpnoyracer, Jan-14-02 02:45 AM
BITER ehhehe
11901, RE: Where 2 Find Sensei body kit or just front, blitz sides & rear, mr2 vent
Posted by xEclipsE RaceRx, Jan-14-02 09:50 AM
Hey Pnoy wha size are thos focal?