I have a 92 Talon and The sideskirt on the driver side is scrathed up and dented and on of the clips holding it on is broken because someone backed into my door. I am not necesarilly looking for a replacment skirt but rather I would like to remove them altogether. The probelem is there are holes drilled in the door for the clips that hold the skirt on and I would like to know you ideas on how to fix these holes

any response would be apreciated
thanks

bondo, or spot welding. then smooth and paint!

How would you go about filling the hole with bondo?

Put some bondo in an around it, sand, more bondo, sand, more, sand, sand, paint.

for holes, I would go with fiber glass, sand it down and add some MarGlass, sand it down, add some bondo and then the putty for a real nice smooth surface......then paint