I'm so close. It seems like there is just one screw or something holding them on. Has anyone taken their headlights off before that can help? I've already taken off the white screw at the corner of the headlight, the two bolts behind the headlight, the bolt on top of the headlight, the screws that hold the bumper on at the corner of the fender, and the row of five bolts that hold the top of the bumper on. What else is there?

there 4 bolt

the 2 u mentioned. then u have to take the bumper off. which is a pain if its stock and theres 2 ones under it.. the bumper is in the way..

Sounds like I'm going to need a service manual.

theres a bolt in the fender well on each side, 5 on top, and 4 underneath the car to remove the bumper. on the headlight itself theres 1 on top, 1 on the bottom of the light, and 2 in the back(PITA to get these two)have fun.


aka:dsm1

>Sounds like I'm going to need a service manual.

Here is your service manual. Take the screw on top off, take the two on the inside of the engine bay off and brake the headlight off from the bottom one. I tried taking off the bumper and I still couldn’t get to it. I just pulled real hard and broke the clip that the bolt holds. You are fine w/ the three holing it on. And after you get it off you really don’t want to put it back on. Leaving it off is something that will just save you time later if you ever have to take them off again.

yeah i wanna take mine off and put the projectors on but i have been procrastinating because of that blasted bumper..


hmm... perhaps ill get klipzracer to do it... ;)

lol, so, you just take out as many bolts as you can find and then just pull real hard till you break off the rest of them?
Sounds simple enough. :)

-Tony 98'GST



http://eclipzgst.dyndns.org
AIM: turboclipz or YNOT420247