| Go back to previous topic | |
| Forum name | Interior/Exterior |
| Topic subject | How to install APC mirrors w/ turn signals |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=11057 |
|
11057, How to install APC mirrors w/ turn signals Posted by All4thaN0okie, Dec-25-01 02:24 PM Ok..i just got those APC mirrors with the turn signals in them for christmas...and i need to know how to wire them to my turn signals...they didn't have ANY instructions..and all they have is a red wire and a black wire... any help at all would be appreciated... | |
|
11058, RE: How to install APC mirrors w/ turn signals Posted by eclipse804, Dec-25-01 04:04 PM Splice the red (power) wire into the power supply for the turn signals (you'll have to dig around your headlights). Sorry I can't be of more help... | |
|
11059, RE: How to install APC mirrors w/ turn signals Posted by randy, Dec-25-01 06:48 PM How much did you pay for them and where? I want to get one also. | |
|
11060, RE: How to install APC mirrors w/ turn signals Posted by Remy, Dec-25-01 10:02 PM You can buy the m-3 style on e-bay | |
|
11061, RE: How to install APC mirrors w/ turn signals Posted by All4thaN0okie, Dec-26-01 02:51 AM i got them for christmas (so i don't know how much or anything)...but i know you can get them at streetbeatcustoms.com ... | |
|
11062, RE: How to install APC mirrors w/ turn signals Posted by EvuLFleA, Dec-26-01 05:12 AM Does the DSM manual in DarkOne's signature have the wiring schematics? | |
|
11063, RE: How to install APC mirrors w/ turn signals Posted by BlackOZ, Dec-26-01 06:35 AM You will definitely have to take them from some point beyond the relays in the engine bay, unless you want to wire up relays to the gauge cluster and run them off of that. The best way to do it would be to splice into the front blinkers then fish the wire down the side of the fender, then into the door and up through the passage for the electric morrors. | |
|
11064, RE: How to install APC mirrors w/ turn signals Posted by All4thaN0okie, Dec-27-01 01:48 AM sorry....maybe im a retard..but i dont want to mess these up....there's a red wire and a black wire...the red goes to positive turn signal and black goes to neg.??? or does black go to ground??? | |
|
11065, RE: How to install APC mirrors w/ turn signals Posted by EvuLFleA, Dec-27-01 05:26 AM Ground it if possible. If not the neg should work. | |
|
11066, RE: How to install APC mirrors w/ turn signals Posted by BlackOZ, Dec-27-01 06:53 AM You should be able to just ground it to the chasis. | |
