Per your requests (and most of all Tim's hahaha)





LED tails:
(pre-installation)

(before adding cover lens)








wilwoods and superleggeras



interior (yes, the headliner you all made fun of is gone :P )





tried to keep all gauges below level of the door


trying to show the blue needles but I evidentially can't hold a camera steady


blacked out FMIC... or radiator...hmmm

yea must be a radiator

completely stock engine bay


home sweet home

Nice job clean setup, cool cf headliner was that handmade.

I think I just ruined my computer screen... That thing is amazing

Amazing EZ!

Who did the tails?

BTW, that is RoTM October :thumbsup

That cas is amazing.

Originally posted by Tuxdreamerx
That cas is amazing.

His Cam Angle Sensor is stock - nothing special or amazing about it.

And do not play it off that you meant to type car as the r and s are not adjacent to each other.

Damn! I love your car..... I hate mine now...:(

Car looks great man!

....still laughing at above comment from CODE4.

I love the check engine light in motion pic.
I dont like the headlights but I absolutely love the rest of the car.

I knew someone would laugh at my CEL. But it's only ONE code (can you believe it?) It's just for the EGR, I'll get that fixed within a month.

I don't like my headlights other, but I love having HIDs. Someday when they develop condensation like the stockers did, or I just have too much time on my hands, I'll crack them open and paint them black or black chrome. I've been looking at laser absorbing paints, so I'll probably go with that he he.

And yes I made the LED tails myself. Inspiration and lots of help came from azdave :thumbsup

Originally posted by CODE4

Originally posted by Tuxdreamerx That cas is amazing.

His Cam Angle Sensor is stock - nothing special or amazing about it. And do not play it off that you meant to type car as the r and s are not adjacent to each other.

LOL ur a cas

Honestly does anyone have a dsm that doesnt throw a code, I pulled the bulb. Very nice car, love the rim choice.

Originally posted by Raine883
Honestly does anyone have a dsm that doesnt throw a code, I pulled the bulb.

I've been playing around with the idea of spraying that 1 bulb or the "lense" with tint spray so that it's not as bright and obnoxious.



The car is looking very BA Erik :thumbsup

Finally you have pics, only took a few years. Clean ass car props :thumb

Originally posted by Boosted_Talon98

Originally posted by CODE4

Originally posted by Tuxdreamerx That cas is amazing.

His Cam Angle Sensor is stock - nothing special or amazing about it. And do not play it off that you meant to type car as the r and s are not adjacent to each other.

LOL ur a cas

Wow lol I just looked at this post for the first time since I posted that.... Maybe I was just admiring how clean it was? No I really meant to say car.. I dont know how that happened. At least it created some laughs.

woah... those tails are nice! wiki or parts list? I need to build a set of those!


oops.. let me browse the old posts to see what you've already posted about them.

Wow..one of the nicest 2G's I have ever seen. I am usually one to admire the motor work more than anything else, but I love the interior! Most of all, nice job keeping it clean.

Where did you get the CF headliner, center console, and doors from?

Originally posted by Ebster1085
Wow..one of the nicest 2G's I have ever seen. I am usually one to admire the motor work more than anything else, but I love the interior! Most of all, nice job keeping it clean. Where did you get the CF headliner, center console, and doors from?

Headliner -

Without sunroof
http://cgi.ebay.com/ebaymotors/95-99-Mitsubishi-Eclipse-2G-CARBON-FIBER-Headliner_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQhashZitem2a004c8b38QQitemZ180393642808QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_500wt_1180

With sunroof
http://cgi.ebay.com/ebaymotors/95-99-Mitsubitshi-Eclipse-2G-CARBON-FIBER-Headliner_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQhashZitem27a98c7864QQitemZ170348279908QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_500wt_1180

Center console

http://cgi.ebay.com/ebaymotors/95-99-Mitsubishi-Eclipse-2G-Real-CARBON-FIBER-Console_W0QQitemZ170380868583QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item27ab7dbbe7&_trksid=p4506.c0.m245#ht_500wt_1180

These are entire carbon fiber doors.

http://cgi.ebay.com/ebaymotors/95-99-MITSUBISHI-ECLIPSE-2G-CARBON-FIBER-DOORS_W0QQitemZ180148589275QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item29f1b152db&_trksid=p4506.m20.l1116#ht_1203wt_939

I dont know if this is where he got them but this is really the only place i've ever seen them. I thought about buying some of those before but they are expensive.

The CF doors are nice but id be worried using them without a cage. You'd get messed up if a mall cop hit you on a Segway.

Originally posted by Raine883
The CF doors are nice but id be worried using them without a cage. You'd get messed up if a mall cop hit you on a Segway.

They're just inner door panels on Erik's car, not entire doors.

I know, i was talking about the full carbon doors on ebay

Originally posted by Ebster1085
Where did you get the CF headliner, center console, and doors from?

www.topshopcarbon.com for headliner and doors. By far the best fitment and quality I've seen in CF parts.

I got the console from the guy mentioned in Josh's ebay link. Quality isn't nearly as good as topshop and it requires some cutting/drilling/smashing things with your fists

I've contemplated doing the squidskins cf exterior and speedglas... I would like to get the 2g to around 2200lbs. But I would probably paint it all black so she'd remain stock-ish in appearance

Originally posted by wickedtalon
woah... those tails are nice! wiki or parts list?

873 superflux LEDs matched for same brightness and DOD approved color
25 9V regulators
handful of IC chips for the controller, knowledge of how to program in BASIC
a lot of wires, fuses, capacitors, resistors
custom PCB boards
and an extra 100+ hours you didn't think you were going to spend on a project, but you already started so you have to keep going...soldering another LED, and another, and another...

Originally posted by ez

Originally posted by wickedtalon woah... those tails are nice! wiki or parts list?

873 superflux LEDs matched for same brightness and DOD approved color 25 9V regulators handful of IC chips for the controller, knowledge of how to program in BASIC a lot of wires, fuses, capacitors, resistors custom PCB boards and an extra 100+ hours you didn't think you were going to spend on a project, but you already started so you have to keep going...soldering another LED, and another, and another...

I would be willing to pay good money for a set of those tail lights. I may end up making a set of my own though.

Originally posted by Tuxdreamerx

Originally posted by ez

Originally posted by wickedtalon woah... those tails are nice! wiki or parts list?

873 superflux LEDs matched for same brightness and DOD approved color 25 9V regulators handful of IC chips for the controller, knowledge of how to program in BASIC a lot of wires, fuses, capacitors, resistors custom PCB boards and an extra 100+ hours you didn't think you were going to spend on a project, but you already started so you have to keep going...soldering another LED, and another, and another...

I would be willing to pay good money for a set of those tail lights. I may end up making a set of my own though.

Considering I have a VERY good idea of the time it takes to make a set, you don't want to pay for the labor. There are those of us that could make you a set but you could pick up a clean RS and throw some nice go fast bits on it for the same price

Originally posted by RoninEclipse2G

Originally posted by Tuxdreamerx

Originally posted by ez

Originally posted by wickedtalon woah... those tails are nice! wiki or parts list?

873 superflux LEDs matched for same brightness and DOD approved color 25 9V regulators handful of IC chips for the controller, knowledge of how to program in BASIC a lot of wires, fuses, capacitors, resistors custom PCB boards and an extra 100+ hours you didn't think you were going to spend on a project, but you already started so you have to keep going...soldering another LED, and another, and another...

I would be willing to pay good money for a set of those tail lights. I may end up making a set of my own though.

Considering I have a VERY good idea of the time it takes to make a set, you don't want to pay for the labor. There are those of us that could make you a set but you could pick up a clean RS and throw some nice go fast bits on it for the same price

Yeah I wouldnt want to spend that much lol.

Originally posted by Tuxdreamerx

Originally posted by RoninEclipse2G

Originally posted by Tuxdreamerx

Originally posted by ez

Originally posted by wickedtalon woah... those tails are nice! wiki or parts list?

873 superflux LEDs matched for same brightness and DOD approved color 25 9V regulators handful of IC chips for the controller, knowledge of how to program in BASIC a lot of wires, fuses, capacitors, resistors custom PCB boards and an extra 100+ hours you didn't think you were going to spend on a project, but you already started so you have to keep going...soldering another LED, and another, and another...

I would be willing to pay good money for a set of those tail lights. I may end up making a set of my own though.

Considering I have a VERY good idea of the time it takes to make a set, you don't want to pay for the labor. There are those of us that could make you a set but you could pick up a clean RS and throw some nice go fast bits on it for the same price

Yeah I wouldnt want to spend that much lol.

No, you don't.

But with a good amount of learning you CAN make your own for relatively inexpensively. I figured out that I can make my set for less than it will cost me to buy a complete brand new set of OEM lights from satan. Check AzDave and ez's threads on HIDplanet.com to learn how they did it.

Um wow nice RS. What exhaust is that? I love the LEDs.

stable: 05' Evo MR
95' GS (Alive and kicking, but waiting on parts)

Thank you, and it's a Espelir JGT500 setup from RRE

Originally posted by Boosted_Talon98
LOL ur a cas

Uhhh, no...I'm a Cas. Hahaha.

That shifter is penis. Get something better. Otherwise, sick. I love the headliner, but the grey doesn't match. Go tan, or black.

Originally posted by nicho919
the grey doesn't match. Go tan

WAT :twitch

Originally posted by nicho919
That shifter is penis. Get something better. Otherwise, sick. I love the headliner, but the grey doesn't match. Go tan, or black.

:squint
WTF? A momo shift knob is gay?

And what the hell are you talking about with the grey?

No more drunk posting for you.

do you have a bigger pic of the third last one? with the red sky. IT is the greatest picture i have ever seen.

Originally posted by Hedge
do you have a bigger pic of the third last one? with the red sky. IT is the greatest picture i have ever seen.

:thumbsup I do have a 1MB size version of it, but it's too big to put as an attachment here or upload to photobucket. PM me your email addy

So there I was taking in the awesomeness of this Eclipse when I noticed something. Your rotors are in backward. Nice car though

Ha ha, not true. You are only seeing the surface in those pictures. Rotors are directional when the internal vanes are not straight, but spiral. The directionality of a rotor actually is not revealed by the holes or slots you see on the outside. i.e. it's the inside that counts :)

Originally posted by ez
Ha ha, not true. You are only seeing the surface in those pictures. Rotors are directional when the internal vanes are not straight, but spiral. The directionality of a rotor actually is not revealed by the holes or slots you see on the outside. i.e. it's the inside that counts :)

This.

Like ez said, the direction of the outer slots means nothing, but the inner vanes mean everything.