Just thought I might post a few pics of the new motor installed. Just finishing up the little details Only got 35 miles on it so far. It was a long 1 year wait from Howell. Let me know what you think.



Oil Block I installed for distributing oil to turbo, stock sending unit, and guage






Its been awhile since I posted but hoping to get back into it a little now that I am settled in the house and car is running again. Mortgage payments are a bitch.

very very very nice. shiny eye candy too. very nicely done. Im sure you've spent the $ to be there.

Wow, that's a great lookin bay! I like you heat shield, also - custom?

yeah the shield is something I made after ruining a carbon hood. Turned it yellow right in the center. So I had to deflect some of that heat.

That is clean as hell. Looks great.

But that looks like a fresh oil spot on the bottom of your #4 runner under the manifold. Is it or just a glare of something?

yeah There was just a little oil from when I filled it. Didn't have a funnel and spilled just a little bit. Got it all cleaned up now though. Thanks for the input guys. It has been a while now and finally got it the way I wanted it. I just have to do the catch can lines and a breather setup for the catchcan. Now if I could just get it to run worth a crap.

very clean, nice work.


But i did notice 2 things i am alittle curious about, one i see your fuel line comes off of the main fuel rail(your venom rail) then crosses over to you secondary fuel rail any reason you did that? Also if you are doing it like that are you planing moving you aeromotive then?

Im not a fan of Turbo'd 420As, but that is done very nicely. Looks good.

So Shiny!!!! Chicks dig Shiny.

great job man 5 outa 5 star. keep it clean

Originally posted by susafuss
very clean, nice work. But i did notice 2 things i am alittle curious about, one i see your fuel line comes off of the main fuel rail(your venom rail) then crosses over to you secondary fuel rail any reason you did that? Also if you are doing it like that are you planing moving you aeromotive then?

well I just wanted to keep everything neat and tight so I crossed over like that. The Line coming out of the secondary rail goes behind the manifold to the regulator.

well i thats cool, it just seems like you are running the fuel lines alttle longer then needed...

when i did mine i took it of of the test port side of the stock rail then ran it right to the new rail then to the regulator.
<\img>
I just think that this is just a simpler way to run the line(note i shortened that line a lot it was just a test fit)

yeah but the stainless line doesn't like to bend that easy, so the use of the 150 and 180 degree fittings made it work perfect. a little longer then needed but fit perfect.

Ahh i totally understand then, never really thought of that. Keep up the good work.

i always did want to turbo my 2gnt...that thing looks like it's going to be fast. can't wait to see the finally pics with the intercooler in there :)

later

Looks great man! Very nicely done and very clean. Hope you get her running well.

Originally posted by pearlwhite2gnt
Just thought I might post a few pics of the new motor installed. Just finishing up the little details Only got 35 miles on it so far. It was a long 1 year wait from Howell. Let me know what you think. Oil Block I installed for distributing oil to turbo, stock sending unit, and guage Its been awhile since I posted but hoping to get back into it a little now that I am settled in the house and car is running again. Mortgage payments are a bitch.

Damn, that looks great very clean and Nice setup. Can you show us the whole car. I own a white one luv white but its hard keep clean my side skirts. Close up my skirts are fading black under fac white paint, someday I'm gonna paint it a Porsche/Champ White.

hey where did you get all your braided steel lines from?

That beast looks sexy as hell. What are those battery terminal connectors look so damn clean could def use somthing like that.

great job, looks sweet as hell

Originally posted by Flipboi89
hey where did you get all your braided steel lines from?

I got all of them from ebay believe it or not. I just found one of the sellers that had a store and got everything I thought I needed and saved on shipping. I ended up needing a few things after the fact as always, but I got them local. As for the battery terminals They are just Phoenix Gold terminals for 1/0 guage wire. I then put a small distribution block under the battery to tie all the factory wiring in. Here is a pic of the whole car for whoever asked for it. Also thanks again for the feedback.

oh thanks for that i never really searched egay. great look of the exterior man. alot of money went into that nice ass car props to you

Love it.

Wouldn't tell you to change a thing

Is the intake manifold a obx?

Originally posted by 99eclipse420a
Is the intake manifold a obx?

It is a Venom intake manifold.