hey, ive had some trouble finding 2ga sideskirts hardware. what exactly do i need and any place to buy it cheap?,, i heard it can be done with rivets.. i bought 2ga black sideskirts for my 98 rs(gray)never done this b4. any tips appreciated..

get the clips from the dealer . Expensive but thats the only ones iv found to fit .Then yes you can rivet the bottom or use self tapping screws

would it cause any problems when painting if i use rivets?, my skirts are black, eventually ,i wanna paint the whole car grey... thanks for the help..

It would be better to use screws

if you go to the local car parts store, you might find some of the nissan or ford push tabs that will work for ya.
otherwise your stuck with factory hardware.

i dont know if you will be able to use screws for every mounting point. either way, grab a tube of window urethane (looks like caulk) and run a bead around the whole panel before you mount it. this will keep the edges flush. be careful though as this stuff is a PITA to get off of anything you didnt want it on.

interesting.. i'll go check some ford push tabs, they r not that cheap but cheaper than mitsu

Originally posted by RS2G
interesting.. i'll go check some ford push tabs, they r not that cheap but cheaper than mitsu

i have tried every single clip they had at numerous places and none fit good enough . Get the ones from the dealer and save the trouble . Its worth the 1.50 a clip

Originally posted by boosted60trimrst
Its worth the 1.50 a clip

wow wish i talked to you sooner, my dealership wanted $3-5 PER clip for me!! (and that was even the dodge dealer, not even Satan!)

skip the clips. I tried them, it was more of a pain in the ass.

Use 3m body tape on everything, and self tapping screws on the bottom. I have had mine on for 2 years now with NO problems. They line up perfect and it was easier than drilling 28 holes in the car.

Tom