well this is the wirein that i got from someone on here.

Door-----------------Spal
-------------------------
Blue-----------------Red--------power for up/down
Black----------------Brown------ground
Green/Red Stripe-----Black (window Actuator) neg
Green/Black Stripe---Red (window Actuator) - pos

i forgot what colors goto the green wire and black wire for the spal kit to the pass. side window from the drivers side.

Passenger Side
------------
Door-------------------Spal
----------------------------
Blue/Black Stripe------Red
Brown/Yellow Stripe----Black
Green/Yellow Stripe----Green
Green/Red Stripe-------Red (window actuator) - pos
Green/Black Stripe-----Black (window actuator) neg

theres not to much to go wrong with just six wires.i know the power to the switch is right,i know i have the right motor wires so what ever it is its in the harness(doubtfull) or the switch but i dont see how the switch could be bad because there is nothing to it at all.

now when i opend the drivers switch it has a board in it and thats why i was askin if the 2 needed to be hooked up together for the pass switch to work right,kinda like a master and a slave-where the slave cant work without the master..also im not usein any relays and past the switch harness its all my wireing..