you can take the altezzas apart fairly easy. the thing about them (or at least about the G1's which i have) is that they arent air sealed. if you look at them you will see plastic pegs that clip the lens to the housing, this is why they suck so bad, so if you take it apart you may even have to break some of the pegs to get them apart. then when you put them back together you can do what APC should have done and seal them with silicon. to take apart the headlights you remove the metal clips and use a heat gun or hair dryer and get a friend to hold the housing while you heat the seal and pull the lights apart once the sealant starts to melt. then unscrew the turn signal and black housing and sand it, then paint and put everything back together. use a high temp paint though, i used hig heat ceramic paint from auto zone

http://www.geocities.com/blue2gnt