How sweet is this thing? ITS HUGE! It wont melt, nor crimp. kinda pricey but its better then blowing a turbo again, hot oil getting hot/cold all the time, right near the ground, im suprised not more people have problems, I suggest people get it.

I have one of those.....I melted my last one from my external Dump. ITs a pain to put together but sweet none the less.

What size did you go with? 8an?

Terry

96 Eagle talon ESI
Greddy header - Greddy exhaust

97 Eclipse
Star Stage II - Boost/oil/EGT gauges - 3" custom DP/Apexi N1 3" exhaust - SFMU/return line - Apexi SAFC - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)

10 AN }(

don't worry i feel ya! i lost mine for almost the same reason, but i think it was for a reason. i figured that turbo wasn't going to get to my goals, so i got the SC31 turbo. i fell better now.

bigbald did you have the stock drain melt or the aftermarket one.


i saw that 10-an fitting on a car on dsmtuners. i pmd the guy and he said it was a bitch to install for some reason

Originally posted by chrysler kid
bigbald did you have the stock drain melt or the aftermarket one. i saw that 10-an fitting on a car on dsmtuners. i pmd the guy and he said it was a bitch to install for some reason

My aftermarket one melted.......I will be selling mines soon anyway...the whole setup actually minus the Wastegate.

thats what im running on my 2.4 setup, 90degree an fitting, 5 feet of -4 line a straight -8 an for oil dump, you can pick everything up from a local performance shop for less than 40 bux, dont get suckered into buying a kit.

DWAYNE H
1996 eclipse
under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job

2000 Yamaha R-1, 165rwhp 117 ftlbs tq

ALMOST THERE...... MUWHAHAHAHAHAHA

Originally posted by etx(SIUECLIPSE)
Yeah right. He is making 380fwhp with ebay hoses and the HRC 2.25" clamp on downpipe attached to his stock exhaust. And a SFMU, LOL! You should be maimed and beaten you fucking liar.

Originally posted by widebodied
thats what im running on my 2.4 setup, 90degree an fitting, 5 feet of -4 line a straight -8 an for oil dump, you can pick everything up from a local performance shop for less than 40 bux, dont get suckered into buying a kit.

not on this car you can't...you will need that kit.....

aeromotive sells, aftermarket fititngs, remove the oil inlet and outlet fittings, and just tap the an ones, or tig weld it is what i did, no kit needed, trust me.

this goes for any turbo, the fittings are about 6-10 buxs each.

DWAYNE H
1996 eclipse
under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job

2000 Yamaha R-1, 165rwhp 117 ftlbs tq

ALMOST THERE...... MUWHAHAHAHAHAHA

Originally posted by etx(SIUECLIPSE)
Yeah right. He is making 380fwhp with ebay hoses and the HRC 2.25" clamp on downpipe attached to his stock exhaust. And a SFMU, LOL! You should be maimed and beaten you fucking liar.

where are you getting fittings that cheap. The cheapers i can find a 90* 8an or larger is like 15.00. 10an is amost 20.00.

The reason the kit is better on a 4g is due to the fittings that fit the oil pan and turbo.

Terry