I will see you soon.....

60-1?

DWAYNE H
1996 eclipse
under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job

2000 Yamaha R-1, 165rwhp 117 ftlbs tq

ALMOST THERE...... MUWHAHAHAHAHAHA

Originally posted by etx(SIUECLIPSE)
Yeah right. He is making 380fwhp with ebay hoses and the HRC 2.25" clamp on downpipe attached to his stock exhaust. And a SFMU, LOL! You should be maimed and beaten you fucking liar.

FP3052....the one and only....

I will dominate you with the FP3065...you just wait.

Good luck getting into the 10's. Practice, practice, practice. (accompanied by the DSM $, $, $ for replacing broken parts, but that's the fun of it.)

What supporting mods do you have again?

Originally posted by HybriDSM
Good luck getting into the 10's. Practice, practice, practice. (accompanied by the DSM $, $, $ for replacing broken parts, but that's the fun of it.) What supporting mods do you have again?

none..... :( :( :(


Well this turbo is in the 11s already...just a matter of time before it makes it to the 10s. I do pratice all the time and i am sure with alot more seat time and a few more upgrades i will be there. I know it is not easy to even attain 11s but 10s is my goal.

Here is my list of www.illeagle-tsi.net/specs/ so far.....

Originally posted by BigBald

Originally posted by HybriDSM Good luck getting into the 10's. Practice, practice, practice. (accompanied by the DSM $, $, $ for replacing broken parts, but that's the fun of it.) What supporting mods do you have again?

none..... :( :( :( Well this turbo is in the 11s already...just a matter of time before it makes it to the 10s. I do pratice all the time and i am sure with alot more seat time and a few more upgrades i will be there. I know it is not easy to even attain 11s but 10s is my goal. Here is my list of www.illeagle-tsi.net/specs/ so far.....

Well there is a lot more you'll need to get into the 10's but that turbo should be fun to use 'til you save up for the engine rebuild, injectors etc. etc. haven fun with it. I know I love mine.

get an FMIC stat....I still get a thrill with my 16g with an FMIC and i'm still in the tuning process!!!

High 10's can be done with a 20G size turbo. With say, a TO4E with all supporting mods, you could do 10's on racegas. Mid 11's on pump gas. It doable, and I plan on going that route soon. I already have a Turbonetics T3/TO4E ball bearing 60 trim with a .63 A/R sitting on my shelf. Just need some exhaust components, GM MAF and some 720's. Good luck, see ya there :D

Originally posted by Vandy420a
get an FMIC stat....I still get a thrill with my 16g with an FMIC and i'm still in the tuning process!!!

Yes FMIC is next up....couple weeks away.....

One of the GST's at the last Socal meet had that exact turbo. Seriously you could feed a cat into that intake.

fuckin beautiful.

:bowdown its so pretty :love

wow Gettin' a woody just thinking about that on both of my cars....mmmmmm.....boooost

:love:beer

get a FRONT MOUNTTTTTTTT!!!!!!!!!!!!!!

I ran mid/low 11s with a TDO5, front mount and electronics and of course the usual bolt ons. Stock internals though. Hoping to get into the 10s with the new TDO6 and rebuilt. It's do-able :)

Originally posted by Jen
I ran mid/low 11s with a TDO5, front mount and electronics and of course the usual bolt ons. Stock internals though. Hoping to get into the 10s with the new TDO6 and rebuilt. It's do-able :)

I :love you. ;)

Originally posted by eclipzGST
I :love you. ;)

Aaaw! :)



:love you too! :P

Originally posted by Jen
I ran mid/low 11s with a TDO5, front mount and electronics and of course the usual bolt ons. Stock internals though. Hoping to get into the 10s with the new TDO6 and rebuilt. It's do-able :)

Gangsta

WWW.CNNMOTORSPORTS.COM

Originally posted by Jen
I ran mid/low 11s with a TDO5, front mount and electronics and of course the usual bolt ons. Stock internals though. Hoping to get into the 10s with the new TDO6 and rebuilt. It's do-able :)

fuck that made me horny.