2GNT.com Forums - Printer friendly page, topic ID #862 -

862, Some local guys max out a stock 7-bolt on a dyno VID
Posted by 420a-Tnthewerks, Jan-08-06 05:17 PM

http://www.1320video.com/videos.php

Maybe not maxing out since they lost fuel pressure..

Impressive though.

863, RE: Some local guys max out a stock 7-bolt on a dyno VID
Posted by Dualgen2, Jan-09-06 06:44 AM

OWNED. Watch the other DSM video on there w/ the "11 sec" 1G that is pretty stock and he bets $100 that he can beat a low 12 second Talon. Also on that same video they show an AWD 4G63 Stratus vs a swapped Civic.
-Dave

864, RE: Some local guys max out a stock 7-bolt on a dyno VID
Posted by DSMxTSi, Jan-09-06 07:57 AM

That was his own damn fault for boosting 35psi. Rediculous :rolleyes . Then trying to throw nitrous at it, come on. That shop also didn't seem to really know much either, that's the way it appeared to me. Then that kid tried to pick up the pieces! :nuts

865, RE: Some local guys max out a stock 7-bolt on a dyno VID
Posted by ScreaminE, Jan-09-06 08:56 AM

This same video was just posted in the pits haha

866, RE: Some local guys max out a stock 7-bolt on a dyno VID
Posted by 420a-Tnthewerks, Jan-09-06 10:51 AM

Originally posted by DSMxTSi
That was his own damn fault for boosting 35psi. Rediculous :rolleyes . Then trying to throw nitrous at it, come on. That shop also didn't seem to really know much either, that's the way it appeared to me. Then that kid tried to pick up the pieces! :nuts

The whole goal of that car was to see how far the stock bottom end could go. It runs on Megasquirt and is tuned by one of the most knowledgeable Megasquirt tuners. The car ran an 11.9 earlier this season but I'm not sure what horsepower he was at then.

867, RE: Some local guys max out a stock 7-bolt on a dyno VID
Posted by 1320Video, Jan-09-06 05:20 PM

Originally posted by 420a-Tnthewerks
Originally posted by DSMxTSi That was his own damn fault for boosting 35psi. Rediculous :rolleyes . Then trying to throw nitrous at it, come on. That shop also didn't seem to really know much either, that's the way it appeared to me. Then that kid tried to pick up the pieces! :nuts
The whole goal of that car was to see how far the stock bottom end could go. It runs on Megasquirt and is tuned by one of the most knowledgeable Megasquirt tuners. The car ran an 11.9 earlier this season but I'm not sure what horsepower he was at then.

^What se said^

868, RE: Some local guys max out a stock 7-bolt on a dyno VID
Posted by FlyinEsi, Jan-10-06 01:19 AM

There was a guy on DSMlink forums who put down 550AWHP on his stock bottom end. He ran it for quite a while and several passes on the track before it finally gave out.

869, RE: Some local guys max out a stock 7-bolt on a dyno VID
Posted by BigBald, Jan-10-06 03:54 AM

Originally posted by FlyinEsi
There was a guy on DSMlink forums who put down 550AWHP on his stock bottom end. He ran it for quite a while and several passes on the track before it finally gave out.

He still runs it. It gave out last time due to a vac hose popping off.

870, RE: Some local guys max out a stock 7-bolt on a dyno VID
Posted by BlackMagic, Jan-10-06 06:04 AM

what times was he running?

871, RE: Some local guys max out a stock 7-bolt on a dyno VID
Posted by BigBald, Jan-11-06 02:14 AM

Originally posted by BlackMagic
what times was he running?

Best time: 10.706@135.96 - he has a FWD 97 GST

872, RE: Some local guys max out a stock 7-bolt on a dyno VID
Posted by DSMxTSi, Jan-10-06 10:43 AM

Originally posted by 420a-Tnthewerks
Originally posted by DSMxTSi That was his own damn fault for boosting 35psi. Rediculous :rolleyes . Then trying to throw nitrous at it, come on. That shop also didn't seem to really know much either, that's the way it appeared to me. Then that kid tried to pick up the pieces! :nuts
The whole goal of that car was to see how far the stock bottom end could go. It runs on Megasquirt and is tuned by one of the most knowledgeable Megasquirt tuners. The car ran an 11.9 earlier this season but I'm not sure what horsepower he was at then.

My reason behind them not knowing much is because that kid in the car should have shut it down immediately upon seeing that boost go past 25 psi, then it pegged at 35 psi. Them knowing it's a STOCK 7 bolt and keeping on it at that much boost is insanely stupid. Sure they were trying to reach a goal, but that's rediculous.

873, RE: Some local guys max out a stock 7-bolt on a dyno VID
Posted by thedawg, Jan-11-06 03:45 AM

I agree, I'm pretty sure I heard the BOV go off before the engine blew. That seemed pretty stupid to let off hard at 35+ psi. The dyno chart seems to confirm it? I wouldn't be at all suprised if they had a nice big boost spike just before the BOV opened that blew it up. Although they were using a gauge that's known to be flaky, I think the MS logs would show what actually happened.

874, RE: Some local guys max out a stock 7-bolt on a dyno VID
Posted by Blizare, Jan-10-06 10:35 AM

Originally posted by DSMxTSi
Then that kid tried to pick up the pieces! :nuts

That made me LOL. I was like.....fuck don't touch that it's gonna be hot :P

875, RE: Some local guys max out a stock 7-bolt on a dyno VID
Posted by Star Turbo Talon, Jan-22-06 11:28 AM

One of the Chicago guys is putting down high 10's with a a stock bottom 7 bolt, DSMlink equipped. 95 GSX though. Several 7 bolt owners have proven the motor isnt made of glass.

Terry

876, RE: Some local guys max out a stock 7-bolt on a dyno VID
Posted by BigBald, Jan-24-06 08:39 AM

Originally posted by Star Turbo Talon
One of the Chicago guys is putting down high 10's with a a stock bottom 7 bolt, DSMlink equipped. 95 GSX though. Several 7 bolt owners have proven the motor isnt made of glass. Terry

If you are referring to Jeff, he has a GST.