Go back to previous topic
Forum name4G63 Tech
Topic subjectJust got my 95 gst started
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i67&topic_id=7373
7373, Just got my 95 gst started
Posted by Eagle420a, May-16-06 06:44 PM
check it out tell what you think, cause i think something needs to be adjusted or something, here are the links
1. http://media.putfile.com/Unsure-Of-Idle
2. http://media.putfile.com/Guage-Idle

Alittle background on car, it has big16g, 255 walbor pump, fmic, 3g lifters, greddy bov, stock 450cc injectors, greddy turbo timer, and 3in exhaust no cat. When i brought the car it had two cracked valves but i decided to put another engine out of a 99 in it, because i been led to believe the previous owner didnt take to car of it, so the car set for over a year before i got my hands on it. So i think the year old gas could have a affect on how it runs. thanks
7374, RE: Just got my 95 gst started
Posted by 97eclipse97, May-17-06 04:33 AM
Originally posted by Eagle420a
check it out tell what you think, cause i think something needs to be adjusted or something, here are the links 1. http://media.putfile.com/Unsure-Of-Idle 2. http://media.putfile.com/Guage-Idle Alittle background on car, it has big16g, 255 walbor pump, fmic, 3g lifters, greddy bov, stock 450cc injectors, greddy turbo timer, and 3in exhaust no cat. When i brought the car it had two cracked valves but i decided to put another engine out of a 99 in it, because i been led to believe the previous owner didnt take to car of it, so the car set for over a year before i got my hands on it. So i think the year old gas could have a affect on how it runs. thanks


Meh, I had year old gas in my car when I finished my project, but it really did not have an effect on how it ran. I can't turn the volume up very loud, but it almost sounds like it's very loud lifter tick, although you have the updated ones, so that should not be it. If you can't figure it out, you may want to at least pull the valve cover off (should only take 5 minutes, if that) and verify that everything is in it's place. Also, why do you still have 450's with a b16g? Are you planning to upgrade soon?
7375, RE: Just got my 95 gst started
Posted by Eagle420a, May-17-06 04:49 AM
Originally posted by 97eclipse97
Originally posted by Eagle420a check it out tell what you think, cause i think something needs to be adjusted or something, here are the links 1. http://media.putfile.com/Unsure-Of-Idle 2. http://media.putfile.com/Guage-Idle Alittle background on car, it has big16g, 255 walbor pump, fmic, 3g lifters, greddy bov, stock 450cc injectors, greddy turbo timer, and 3in exhaust no cat. When i brought the car it had two cracked valves but i decided to put another engine out of a 99 in it, because i been led to believe the previous owner didnt take to car of it, so the car set for over a year before i got my hands on it. So i think the year old gas could have a affect on how it runs. thanks
Meh, I had year old gas in my car when I finished my project, but it really did not have an effect on how it ran. I can't turn the volume up very loud, but it almost sounds like it's very loud lifter tick, although you have the updated ones, so that should not be it. If you can't figure it out, you may want to at least pull the valve cover off (should only take 5 minutes, if that) and verify that everything is in it's place. Also, why do you still have 450's with a b16g? Are you planning to upgrade soon?


i wasnt planing on uping the boost so i thought it would be ok for for alittle while, until i get the funds, i'll pull the valve cover and see whats going on. thanks
7376, RE: Just got my 95 gst started
Posted by eclipzGST, May-17-06 08:00 AM
Even though the "boost" will be the same, you'll have a lot more airflow. Get some 650's for peace of mind.
7377, RE: Just got my 95 gst started
Posted by 97eclipse97, May-17-06 08:41 AM
Originally posted by eclipzGST
Even though the "boost" will be the same, you'll have a lot more airflow. Get some 650's for peace of mind.


Well I'm assuming he has nothing to control air/fuel right now. If he had DSMLink, than he should get no smaller than 750's. Without it, 650's may be too much for just an AFC. Definitely at least 550's though. 450's are barely enough for a 14b, never mind a b16g.
7378, RE: Just got my 95 gst started
Posted by Eagle420a, May-17-06 05:39 PM
thanks for the replys, i will get the injectors asap since you guys said that, my other question is does the engine sound normal from what you seen on the video. I just realized putfile isnt that good so i uploaded a better quality vid to streetfire. here it is
Engine: http://videos.streetfire.net/video/99BA8FBE-8213-45C8-8D85-611E154134B4.htm
Exhaust:
http://videos.streetfire.net/video/009F1B53-6A7F-42A9-8F2D-E8153E541F62.htm
7379, RE: Just got my 95 gst started
Posted by 97eclipse97, May-18-06 02:20 PM
The exhuast sounded fine, but something did not sound right with your engine. It is too high pitched. It may just be a belt or something, but it does not sound right to me. I would check all of your belts for tightness. Other than that I don't know.
7380, RE: Just got my 95 gst started
Posted by Eagle420a, May-18-06 07:30 PM
maybe i got one of the belts to tight, i will check that out. thanks
7381, RE: Just got my 95 gst started
Posted by Eagle420a, Jun-07-06 12:58 PM
well sent the car to diamondstarmotorsport, they pulled the head and look what they found, now i know why it was running like crap.:-(, the coolant on the pistons is from taking the head of some got on it.