| Go back to previous topic |
| Forum name | 4G63 Tech |
| Topic subject | Another 1G up and running on DSMLink |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i67&topic_id=1532 |
1532, Another 1G up and running on DSMLink
Posted by SilverBullet20g, Aug-29-05 07:52 AM
I finally found another ECU and had it socketed for $325. I just put the DSMLink board in and changed some of the default settings and it idled perfect with the new 780cc injectors. I drove it to the gas station on the base settings and amazingly it drove fine! I can't believe how easy the interface is compared to the other programs.
A PLX-M300 is going in tomorrow so I can start tuning and then dyno/track next week. It made 280whp before with the same 16g turbo w/550cc/SAFC @ 15psi. We will see what she does with the new toys!
DSMLink :love
|
1533, RE: Another 1G up and running on DSMLink
Posted by Hult250R, Aug-29-05 11:04 AM
Im Jealous...
|
1534, RE: Another 1G up and running on DSMLink
Posted by Diceman19, Aug-29-05 12:47 PM
Originally posted by Hult250R
Im Jealous...
you should be. now sell your organs to buy dsmlink. :D
|
1535, RE: Another 1G up and running on DSMLink
Posted by Remy, Sep-03-05 01:40 PM
Bah
safc > dsmlink
WWW.CNNMOTORSPORTS.COM
|
1536, RE: Another 1G up and running on DSMLink
Posted by SilverBullet20g, Sep-03-05 06:04 PM
Thats why I see you on the DSMLink boards :-)
So I put the 1G on the AWD Dynojet last night before closing and it pulled 195 AWHP on the base settings for 780 injectors with a small 16G (all zeros except for default settings). Did about seven pulls to adjust the fuel settings to get a good A/F Ratio around 11.6 through the RPM curve. The AWHP jumped to 256 AWHP (at 15psi) without any timing or airflow adjustments. I had the famous "Timed Out" error before we could make any adjustments to the timing or airflow. Restarted the laptop, unplugged all connections, checked com ports, etc... I'm going to run the debug and send it to Thomas or Dave this weekend.
|