Go back to previous topic
Forum name4G63 Tech
Topic subjectIntake suggestion
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i67&topic_id=12803
12803, Intake suggestion
Posted by Mattcky2k, Sep-12-03 12:52 PM
i just bought a 2600 ACT clutch, ACT eXact flywheel, and am sending my transmission to john shepard sometime soon to get rebuilt. anyway with all that out of the way i was looking for good intakes. i'm really looking at the injen intake because it comes with the pipe between the MAS and turbo. but i've heard alot of good things about the K&N filter kit too. doesn't come with a pipe but RRE says it gaurantees to make 10 HP. i was just wondering what your suggestions would be. also when i get whatever intake i get would this be a good time to do the BOV dumb tube removal and is that a good mod? thanks
12804, RE: Intake suggestion
Posted by eclipzGST, Sep-12-03 01:11 PM
IMO, the Injen is way overpriced because it looks cool. Just go with the K&N kit. If you're looking for an upgrade to the snorkel pipe, try Dejon Tools or you can mod it with a piece of ABS or PVC.

<<would this be a good time to do the BOV dumb tube removal and is that a good mod?>>
Absolutly. You don't actually "remove" the tube. First, pull the MAS off the pipe going to the turbo. Look down into it and you'll see how much air is blocked off by the dump tube. Score it with a screwdriver or something to mark where you'll be cutting. Then, you just break the glue away, slide the end out of the intake pipe and cut it so it's flush with the inside of the intake pipe. Done.



-Tony
98'GST
92'TSI-AWD

eclipzgst@charter.net
http://eclipzgst.webhop.net
http://www.newengdsm.org/

turboclipz on AIM
12805, RE: Intake suggestion
Posted by EcLIpsInEmCEe7, Sep-12-03 05:03 PM
its biased opinion but i suggest the K&N FIPK. i have that and the dejon tool intake.
12806, RE: Intake suggestion
Posted by chrysler kid, Sep-12-03 06:28 PM
>its biased opinion but i suggest the K&N FIPK. i have that
>and the dejon tool intake.
>



that filter wouldnt fit past my uicp.




12807, RE: Intake suggestion
Posted by eclipzGST, Sep-12-03 09:32 PM
Is that ^^^ a custom uip?




-Tony
98'GST
92'TSI-AWD

eclipzgst@charter.net
http://eclipzgst.webhop.net
http://www.newengdsm.org/

turboclipz on AIM
12808, RE: Intake suggestion
Posted by invaznGST, Sep-12-03 11:02 PM
i have a RRE UCIP, Injen Intake, K&N FIPK, Type-S BOV..everything fits fine.
12809, RE: Intake suggestion
Posted by chrysler kid, Sep-13-03 10:29 AM
>Is that ^^^ a custom uip?
>
>
yes i think its 3in piping that narrows down to 2.25 towards the t/b
12810, RE: Intake suggestion
Posted by Remy, Sep-14-03 06:00 PM
Injen intake and filter with Greddy Piping here.

Edit: Not all dsm's suck, just mine :)