i want as much info about boost creep that you guys can give me. i want to get a 3" apexi n1 and a downpipe from somewhere. am i going to get boost creep with that and a stock turbo? any solutions to alleviate the problem. i have read a lot about porting and adding the 43mm(i think) flapper to the wastegate to fix it. thanks!

You will need to port the turbine housing, wastegate hole, and o2 housing. I used the stock wastegate flapper but basically ported the hole to the very edge of the flapper. It fixed my creep after installing the 3" turbo-back.