I am a n00b....It looks like the oil return line + gaskets......I know i am missing the J pipe bolts and o2 gasket...anything else i will need for this install? What are these water lines i am reading about?

You use the stock bolts for the J pipe. What o2 gasket? For the o2 housing? That doesn't need a gasket :)

they sell them for the 02 housing...why wouldn't it need one? What stock bolts am i to use to bolt on the j pipe?

oil drain line. you can use the stock 2g one with some modification tho. where did you buy that kit from btw, looks like RRE

nope it is SBR and got it new for 150 off the trader....SBR sells them like this for some odd reason.

That picture is all you need. Thats all I got when I bought my 2g install kit from SLow boy racing. Thats everything there. Everything else use stock.

yup, you're missing the gasket and j-pipe bolts. Everything else is cool. The water lines you'll use are the stockers. You just switch them inlet/outlet.
I just saw a real good write up on this swap. I'll find it and post it.

Well I just ordered a new Oil Return line, Crush Washers, o2 Gasket and Oil DRain Gaskets from forced performance. The stuff isn't expensive minus the oil return line...this ought to be a fun install. My understanding is that the water lines will be the worse part of this install.....is this true? Are 1g water lines better to use for the Big 16g? Also where can i get J-Pipe bolts and gasket from?

OK, I lost internet service last night but it's back today. Here's the link to the walkthrough...
http://www.plymouthlaser.com/evo16g2.htm
And if you go the the main page on that site, he has a TON of good info for other mods and stuff. :thumbsup

Originally posted by eclipzGST
OK, I lost internet service last night but it's back today. Here's the link to the walkthrough... http://www.plymouthlaser.com/evo16g2.htm And if you go the the main page on that site, he has a TON of good info for other mods and stuff. :thumbsup

Thanks alot....

Do you have a ported 02 housing. You want to install that now instead of going back over to do it again some day. Its such a pain. And you want a ported 02 housing and maybe even a ported exhaust manifold. Makes significant different in spool up. You'll regret it later.

Originally posted by Jarrad_GST
Do you have a ported 02 housing. You want to install that now instead of going back over to do it again some day. Its such a pain. And you want a ported 02 housing and maybe even a ported exhaust manifold. Makes significant different in spool up. You'll regret it later.

there's also a link off of that page I posted earlier on where/what/how much to port.