usually with this sort of question i would just contact one of my 4g63 buddies but it so happens to be that they all ahve blocked me from their buddylists.

anyhoo i hooked up a sunpro a/f gauge. i followed the instructions from RRE tapped the 02 sensor on the ecu, which is already tapped by the turbo timer. the wire is crimped to the turbo timer and a little further down the line is the a/f crimp. the gauge reads all the way rich every time i get on it, at idle it goes around the clock, like its reading the a/f spray by spray from the injectors.

anyways are those readings normal or did i tap the wrong wire or sumthin. its a cheap gauge but it still should work properly.