So I decided to start a new project. The company that sells all the materials, has a kit for a "Micromaille Dragonscale Tie". Dragonscale referring to the type of weave, and micromaille referring to the fact of how many tiny ass rings it uses.

Decided to include some photos of the beginning, and also included what the kit says it will look like when done. I am currently 9"in of my desired 18" length *pause for sexual innuendo joke* . This thing was a pain in the ass to learn, took my 3 tries to get the weave down, but now that I got it down so its just rinse repeat. The sheer number of rings makes this thing take forever, about 30 hours in. Finally picking up some speed, but not a whole lot.

The wife and I are thinking about making some extras of these to sell, but more than likely the "fine" instead of the "micro" (takes half the amount of rings due to size). So if anyone is interested let me know. Will be posting updates

Starting out











What the finished product is "suppose" to look like.



Will have to snap a pic tonight of current progress. Takes a lot of time but the micromaille has a really cool feel, very flexible, almost feels like a rough fabric.

Damn that is legit!

That is the most kickass tie I've ever seen. I would buy one, depending on how easy it is to actually tie it.

For the micromaille I am doing, I would prolly charge $250, I will have close to 60 hours in labor not including cost of materials. I plan on doing a "fine" as opposed to micromaille, slightly larger scales, should cut labor in half, not sure how it will affect appearance. Be looking at $150 for that. The inside ring in this one is black, but can be other colors.

As far as difficulty to "tie" Think of it more as a Necklace. The upper part of the tie, is rolled over chain, to give the illusion of a "knot", and the ends of the "knot" our connected to a chain necklace that will close in the back like a necklace. Hope I am explaining that right.

Want to make sure I can make this thing look nice and legit for myself before I "officially" try to make and sell these.

Working with chain is fun. I've done a couple of tunics and coifs/gorgets over the years for myself and various SCA friends. I've never worked with rings quite that small before though.

You'll have some stiff competition at that price point, though. Unicorn's garden and a few other specialty retailers already sell these. (Ring size is quite a bit larger, though) The price points on those tend to start around $50.

And you hit the nail on the head Paul. Size of the ring makes a huge difference. That and of course the complexity of the weave and the material its being made out of all affect price. If I was using a decent size ring, and a standard 4-1 weave I bet I could sell these for like ~$50-60. I have seen Dragonscale bracelets on sales for around 60-$75 (although some reaching double that) price point. Considering I would be doing twice the length of the bracelet on average, along with a "knot" and a chain necklace, I feel the price is fair.

Granted it is a high, price if you do the match labor comes out to ~$3 an hour.

Paul you said you have done tunics and etc, off-topic, but do you have any pics? I am working on a Scalemail vest, this is my first chain project I have done. I find it relaxing, and get to do something I enjoy.

I know I've got some pics at home somewhere, give me some time to dig them up, and I'll post them.

After weeks of back breaking labor (no seriously i feel like an old man with my back, its crazy) I should be done with this project hopefully tonight. Little sneak peak now, the of the beginning of the knot.

I want a whole shirt like that

Without further ado, I present to you




(back of the knot)

If anyone does a slashing attack towards about a 2 inch wide section of the very center of your torso, then you're all set :)

Seriously, lots of work put into that and it looks cool. Nice work.

I'm trying to think if I need a chain mail anything... nothing comes to mind but if it does I'll let you know.

no one needs anything made of of chainmail (unless you are into armed combat by sword) its more of do you want chainmail? Or scale for that matter. Feel free to like my FB page for more updates and items. www.facebook.com/tieronechain

Working on a Blue one now, while training the wife on a red one. Doing these ones in a thicker ring. Still looking nice but wont take nearly as long (sadly does not feel as cool as the original) Feel like I am flying through this one. Let me know if you or anyone you know is interested in these beauties . Looking at $140 + shipping for the ones I am doing now (would have to calculate a price for the micromaille/much smaller rings if someone is interested in that). Or let me know if you are interested in some custom work



Guys feel free to like my facebook page https://www.facebook.com/TierOneChain . Going to start putting updates on there to keep the forums clutter free. But let me know if you need anything. Ok done plugging myself!

BTW Paul, I do have a black dragonscale bracelet on their, for under $50 =)

Finally got time to finish the blue one
http://www.ebay.com/itm/281318886988?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
I will honor the $140+shipping for you guys, let me know if your interested.

Question, does it Rust??











Look what I just bought, that will go great with this. :7