| Go back to previous topic | | Forum name | The Pits v3.1 | | Topic subject | JE vs Wiseco | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i60&topic_id=47821 |
47821, JE vs Wiseco Posted by 740 turbo brick, Dec-20-11 08:03 PM
Tax time is getting closer, which means I am starting shopping for engine parts. Obviously both of these brands are top of the line. But which is the best to go with? I checked Modern Performance, who doesnt seem to have 2G parts anymore for some reason, and raceeng.com. JE pistons from them were $600+, and Wiseco were around $450. Obviously Im inclined to go with Wiseco to have some money left over for other motor parts, but I dont want to go with them if people have used Wiseco pistons before with poor results. Opinions needed here.
|
47822, RE: JE vs Wiseco Posted by bullettdsm, Dec-20-11 08:08 PM
You know my opinion. I'm a big JE fan. Tried and tested, over and over. Have you tried E-Bay for the JE's?
|
47823, RE: JE vs Wiseco Posted by Slo2g, Dec-20-11 09:18 PM
I ran wiseco in my last build and Tim is still running them. I've never had an issue with them and also never had any excessive piston slap. I also bought them for the 1g but sold that set up before I could run them, the guy I sold them to is having no issues with them either. I personally like them, esp for a na build, but if you want top if line venolia is really nice as well as Arias. Take it with a grain its just my opinion.
|
47829, RE: JE vs Wiseco Posted by Fotowntalon, Dec-21-11 07:04 AM
Damn it Colby, haven't I told you a million times to order your pistons through me and you do have to worry about pricing? *sigh*
Anyways, JE's tend to weigh a little less on average, but Wiseco's come with a nice skirt coating. Both sets come with rings. I cant get you Wiseco's for $425+shipping (or you can pick them up for free)OR JE's for $450 for the 8.5's or $475 for the 10.5's with the same shipping deal. If you want higher comp, like 11.5 I can call my contact at Wossner (not an official distributor for them but have a friend there) and can work out a deal there. Not sure on there pricing, but 'should' be able to get them to you for under $500.
If you are worried about quality all 3 are good quality piston manufacturers and you shouldn't have a problem either way.
|
47830, RE: JE vs Wiseco Posted by 420agreenvilleSC, Dec-21-11 09:18 AM
Originally posted by Slo2g I ran wiseco in my last build and Tim is still running them. I've never had an issue with them and also never had any excessive piston slap. I also bought them for the 1g but sold that set up before I could run them, the guy I sold them to is having no issues with them either. I personally like them, esp for a na build, but if you want top if line venolia is really nice as well as Arias. Take it with a grain its just my opinion.
I have your other wiseco's in mine.. running well :)
|
47831, RE: JE vs Wiseco Posted by teklein, Dec-21-11 05:28 PM
Originally posted by 420agreenvilleSCOriginally posted by Slo2g I ran wiseco in my last build and Tim is still running them. I've never had an issue with them and also never had any excessive piston slap. I also bought them for the 1g but sold that set up before I could run them, the guy I sold them to is having no issues with them either. I personally like them, esp for a na build, but if you want top if line venolia is really nice as well as Arias. Take it with a grain its just my opinion. I have your other wiseco's in mine.. running well :)
Yeah, I have your Carillo's!
Also, bring it Colby. Zac and I are ready (hes driving).
|
47832, RE: JE vs Wiseco Posted by Slo2g, Dec-21-11 05:32 PM
Oh yeah, Mikey has wiseco and Tim has CP
|
47835, RE: JE vs Wiseco Posted by 420agreenvilleSC, Dec-21-11 08:45 PM
I'm a fan of wiseco's.. only cuz of my JE mishap..
hot summer temps + 21psi w/ no ignition retard = learning experience :wallbash
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=60&topic_id=40459&mode=full
|
47836, RE: JE vs Wiseco Posted by CODE4, Dec-21-11 10:27 PM
that is not a problem with the product but rather operator error.
|
47837, RE: JE vs Wiseco Posted by xcasbonx, Dec-22-11 05:57 AM
Originally posted by CODE4 that is not a problem with the product but rather operator error.
Beat me to it.
|
47838, RE: JE vs Wiseco Posted by 420agreenvilleSC, Dec-22-11 07:47 AM
Originally posted by xcasbonxOriginally posted by CODE4 that is not a problem with the product but rather operator error. Beat me to it.
I know this, but you know us humans - we love to blame :P plus, i was bein sarcastic lol
|
47840, RE: JE vs Wiseco Posted by 740 turbo brick, Dec-22-11 02:21 PM
Originally posted by tekleinOriginally posted by 420agreenvilleSC Originally posted by Slo2g I ran wiseco in my last build and Tim is still running them. I've never had an issue with them and also never had any excessive piston slap. I also bought them for the 1g but sold that set up before I could run them, the guy I sold them to is having no issues with them either. I personally like them, esp for a na build, but if you want top if line venolia is really nice as well as Arias. Take it with a grain its just my opinion. I have your other wiseco's in mine.. running well :) Yeah, I have your Carillo's! Also, bring it Colby. Zac and I are ready (hes driving).
Oh just you wait,...Its in the process of being brung! Ive been out of the scene for a short while due to lack of funds, but whenever money permits I am/will be back in the ranks of the 2GNT all motor competition.
| |