| Go back to previous topic |
| Forum name | The Pits v3.1 |
| Topic subject | I need help!!! |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i60&topic_id=34753 |
34753, I need help!!! Posted by eclipsed08, Jul-22-08 05:00 PM
Ok here's the story..
Today I blew my motor..I'm suspecting I seized it up. I was leaving my bank today and with all the rain we have been getting I didn't notice the huge pot hole. Yeah it was covered in rain and just looked like a puddle. Well I drove right into it and didn't think nothing about it cause everything seemed fine..
Well I made it about a mile down the road when the motor just quit. I pulled over an tried to start back up and nothing. The car won't turn over, just makes a clicking sound from the started. Upon further inspection I noticed the oil pan has a HUGE dent in it. Well I work for mitsubishi and got it back to the shop by tow truck, threw it up on the lift. And confirmed that the motor is seized up bad. Looks like I lost oil pressure, and JUNK.
My question is this, I have the money to fix the motor...but how should I handle this?? I have been in contact with the bank and was told they will get in touch tomorrow...but it sounds like they don't want to fix this and are going to blow me off.
What should I do if they don't want to help me??
I need a new motor, new ball joints and a front bumper cover.
|
34757, RE: I need help!!! Posted by DR1665, Jul-22-08 07:41 PM
If the pothole is in the street, it's the city's responsibility, but they might only be liable up to a certain limit. Not uncommon to hear fellas talking about getting funds for a replacement wheel due to pothole damage.
A bank, on the other hand, might need to speak with an attorney.
|
34759, RE: I need help!!! Posted by eclipsed08, Jul-22-08 08:05 PM
yeah I have alot more than just a little rim rash ( no pun intended )
I hope can get something for this...I'm so upset I have a blown engine it's like loosing a child.
|
34760, RE: I need help!!! Posted by Star Turbo Talon, Jul-22-08 11:28 PM
file a police report and file it with your insurance. (if you have full coverage). This is actually pretty common.
|
34774, RE: I need help!!! Posted by eclipsed08, Jul-23-08 08:48 AM
I just got word they want to total my car out...FUCK NO!! Well the lady is actually really nice and is going to keep it under the total out price of $2800
Can I get a motor for that?? Any ideas?
|
34775, RE: I need help!!! Posted by cs82685, Jul-23-08 09:01 AM
Originally posted by eclipsed08 I just got word they want to total my car out...FUCK NO!! Well the lady is actually really nice and is going to keep it under the total out price of $2800 Can I get a motor for that?? Any ideas?
you can get a junkyard long block for a couple hundo or build a motor for that much
|
34785, RE: I need help!!! Posted by Star Turbo Talon, Jul-23-08 01:36 PM
Good job. 2800 gives you a ton of options!
|
34793, RE: I need help!!! Posted by eclipsed08, Jul-23-08 04:41 PM
Originally posted by Star Turbo Talon Good job. 2800 gives you a ton of options!
Really hoook it up with some ideas
|
34795, RE: I need help!!! Posted by Flipboi89, Jul-23-08 05:38 PM
find a cheap ass 420a somewhere and then clean it up from there
|
34802, RE: I need help!!! Posted by Star Turbo Talon, Jul-24-08 04:41 AM
Originally posted by eclipsed08Originally posted by Star Turbo Talon Good job. 2800 gives you a ton of options! Really hoook it up with some ideas
come on Russ....step outside the box...lol
You could build a new motor with forged internals. Parts should be about 1500 and machine work 500.00. save 800.00 for somethign else you have wanted.
If your not turbo, buy a use good motor for 500.00. 2300 you can build a base turbo kit.
2800.00 you could sell your car and buy a GSX if you wanted too.
Terry
|
34803, RE: I need help!!! Posted by eclipse982nrRST, Jul-24-08 05:02 AM
Gave you a good deal on a built shortblock...
|
34804, RE: I need help!!! Posted by dalesmitsu, Jul-24-08 08:54 AM
Originally posted by eclipsed08 Ok here's the story.. Today I blew my motor..I'm suspecting I seized it up. I was leaving my bank today and with all the rain we have been getting I didn't notice the huge pot hole. Yeah it was covered in rain and just looked like a puddle. Well I drove right into it and didn't think nothing about it cause everything seemed fine.. Well I made it about a mile down the road when the motor just quit. I pulled over an tried to start back up and nothing. The car won't turn over, just makes a clicking sound from the started. Upon further inspection I noticed the oil pan has a HUGE dent in it. Well I work for mitsubishi and got it back to the shop by tow truck, threw it up on the lift. And confirmed that the motor is seized up bad. Looks like I lost oil pressure, and JUNK. My question is this, I have the money to fix the motor...but how should I handle this?? I have been in contact with the bank and was told they will get in touch tomorrow...but it sounds like they don't want to fix this and are going to blow me off. What should I do if they don't want to help me?? I need a new motor, new ball joints and a front bumper cover.
I have a spare 97-99 front bumper I can send it you for a few bills. It has curb rash from my driveway easy fix by repainting it.
shoot me your info. I take money order or paypal.
I'm from Ohio my zip is 44705 I'm going to use Fedex but not sure about the cost.
Does Fedex wrap and box up items like bumpers.
|
34805, RE: I need help!!! Posted by DR1665, Jul-24-08 09:09 AM
I would take of it down to my cousin, Asadullah, who works in securities and have him invest in Norris Mutual Funds...
Terr-dog speaks tro0f.
|
34806, RE: I need help!!! Posted by eclipsed08, Jul-24-08 04:05 PM
wtf does that have anything to do with rebuilding my motor?? LOL
|
34810, RE: I need help!!! Posted by hazardeclipse, Jul-25-08 04:21 AM
Originally posted by DR1665 I would take of it down to my cousin, Asadullah, who works in securities and have him invest in Norris Mutual Funds... Terr-dog speaks tro0f.
lol at office space...
|