Go back to previous topic
Forum nameThe Pits v3.1
Topic subjectI came home today and found something... (56k needs a turbo)
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i60&topic_id=23164
23164, I came home today and found something... (56k needs a turbo)
Posted by freelancefool, Apr-16-07 04:31 PM
I walked up to the door and check out what I found.



Who is this from?



I wonder what this could be....



Oh snaps!



That's badass!



I'm sooo close to getting the car back together that I needed to share this. Thanks!
23168, RE: I came home today and found something... (56k needs a turbo)
Posted by saikou, Apr-16-07 05:42 PM
OMG, AeM intaaaaaaaaaaaake!!!11
:o :o :o :o :o :o
23179, RE: I came home today and found something... (56k needs a turbo)
Posted by boosted4g64, Apr-16-07 08:13 PM
how much did the intake run you?
23186, RE: I came home today and found something... (56k needs a turbo)
Posted by freelancefool, Apr-17-07 01:57 AM
For whatever reason that is what Road Race Engineering packed the adjustable upper control arms in. Whenever I get home today I am going to see about pressing the bushing out on the lower compression arm on the driver's side and flipping it to even out the caster. Then I will probably set the arms to give me +1.5* caster. That should max me out with about 6* caster on both sides. After that I need to get off my lazy ass and finish my manual swap and get an alignment.
23192, RE: I came home today and found something... (56k needs a turbo)
Posted by DarkOne, Apr-17-07 05:44 AM
Fuck yeah. That's awesome.
23194, RE: I came home today and found something... (56k needs a turbo)
Posted by Nine5eclipse03, Apr-17-07 07:14 AM
thats what i thought when i saw the first pic. "cool.... an intake.." lol
23196, RE: I came home today and found something... (56k needs a turbo)
Posted by eclipse982nrRST, Apr-17-07 09:24 AM
those are fucking beautiful!

how much did they cost if you dont mind telling?
23205, RE: I came home today and found something... (56k needs a turbo)
Posted by freelancefool, Apr-17-07 11:46 AM
They were $458 out the door from Road Race Engineering. I don't really need them right now, but by the end of the summer I plan on being a wee bit lower on some coilovers. I picked them up because my ball joints were pretty toasted, I knew these were replaceable and I could correct the additional camber I would pick up or add to it. I think they are good for +- 3 degrees camber and +- 1.5 degrees caster. I ordered them Tuesday of last week and they were here Monday. If you want better photos, I can take some in brighter light so the autofocus won't suck so bad.